| EQUIPMENT REQUIREMENTS CT-2 6 in. C-clamps�. At least 4 and probably 6 as project matures. Try to pick bettet quality ones that have a deep "throat", or reach, so you can clamp items further in from the edge. 2 x 2 lumber�......This should be reasonably square and can be 1 � x 1 �, but not larger than 2x2. This will be cut into lengths from 2in to 12in to hold pieces in alignment for welding. Assembly Fixture, AF-1��The edges and surface will be used as "datem lines" for aligning pieces for assembly. |