Good advice on what to get
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUTOMAG UPGRADES... Good advice on what to get |
||||||||||||||||||||||
| This section will cover what sorts of doo dads you should put onto your automag. These upgrades are just suggestions. You don't absolutely HAVE to get these things but by doing so, it would make your marker one of the best on the field. | ||||||||||||||||||||||
|
||||||||||||||||||||||
| One of the first upgrades you should consider is an aftermarket barrel. If you get a classic automag you will have no choice but to get a barrel, for they do not come with one unless you buy a used one. This is a smart parts tear drop barrel. | ||||||||||||||||||||||
|
||||||||||||||||||||||
| This is a nitro tank. Nitro tanks go very well with automags. Automags do not run well on co2. If you do not wish to spend hundreds of dollars on a nitro tank, you might want to buy a co2 tank, a remote system, or get a co2 tank with an anti siphon tube that will prevent liquid co2 from entering your gun. Using co2, however, will make your velocity inconsistant. | ||||||||||||||||||||||
|
||||||||||||||||||||||
| If you are looking for an upgrade that will drasticly increase your rate of fire, then you might want to consider the retro valve. if you have an automag rt, then you don't need one of these because the retro valve is basicly a valve that fits the classic automag body. This modification will make your trigger bounce back after you fire. Now a days, the retro is going for $280. | ||||||||||||||||||||||
|
||||||||||||||||||||||
| This is an automag with a warp feed attached to it. As you might notice, there is no hopper ABOVE the gun, making a lower profile so people wont see your hopper before they see your head. the warp feed feeds at insane speeds, and requires a motorized hopper (also shown in picture) known as a revvi or revolution hopper. these two feeding forces will help you not to chop. | ||||||||||||||||||||||
|
||||||||||||||||||||||
| The level 10 bolt is a modification that is, in my opinion, THE best upgrade you can get. This bolt will almost ensure no more ball chops!! If there is too much resistance, the bolt doesn't fire the ball, making it almost impossible for the bolt to cause chops. here is a link giving you ALL of the level 10 bolt LINK!!!!!!!!!!!!!!! | ||||||||||||||||||||||
|
||||||||||||||||||||||
| This is an intelliframe. The intelliframe can be electronicly hooked up to a motorized hopper to make the inboard propellers move every time you pull the trigger. The trigger is very light. I personally own one of these and it is by far the sweetest frame on the market. | ||||||||||||||||||||||
| HOME | ||||||||||||||||||||||
|
|
||||||||||||||||||||||