 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GHETTOFIED SECTION |
|
|
|
DICLAIMER: This section will show you how to ghetto out your automag. It is not for the weak of stomach. If you screw up and your stuff is ruined, its not anyone's fault but yours!!!! |
|
|
|
THE GHETTO Z-GRIP |
|
|
If you do not care about your stock mag grip (this "upgrade" is for stock classic mag trigger frames only), then this experiment is for you. If your life depends on your stock grip and you don't want to risk it, then at the bottom of the page there is a "HOME" button.
Start off by gathering supplies. You will need your stock frame, a hex wrench to take the grips off, a hack saw, JB COLD WELD (you can buy this at any hardware store. its two putties that you mix together and in 4 minutes it sets. after 4 hours, it dries to be harder than steel). You will also need a vice to hold stuff in place.
STEP 1: After you have the materials, then start by removing the trigger guard, and part that you hold on to as pictured below. |
|
|
|
 |
|
|
|
STEP 2: After you are done with that, you will need to find out what angle you want the part you hold on to to be at. BEFORE YOU PUT THE JB WELD ON, practice to see what fits your playing style best. |
|
|
|
 |
|
|
|
|
STEP 3: When you are done with that, then carefuly apply the JB WELD, and put it in the vice/clamp and let it dry for 4 hours. |
|
|
|
|
|
|
 |
|
|
|
STEP 4: As you can see, my frame is PRETTY DARN hicked out. thats ok though. You can get creative with the trigger guard and make a double trigger!!!! I made a ghetto grip with the top of nail clippers and it looks like a hinge trigger!
You will need to hack off the bottom of the grips because they get in the way of where you screw your drop forward/cradle/asa. There you have it. the ghetto grip!
I WILL POST MORE EXPERIMENTS WHEN I MAKE MORE STUFF |
|
|
|
|
|
 |
|
|
|
UNPRECEDENTED GHETTONESS |
|
|
|
This is a section dedicated to the most hicked out mag I have ever SEEEEEEN in my LIFE! It was crafted by no other than SHADOW221 of pbreview.com! here are some pictures and captions explaining what he did to his mag. |
|
|
|
 |
|
|
|
Thats right guys and gals! those are cardboard grip pannels! This stylish ghettomag comes with a Crown RoyalTM Tank cover, a crafted oak wood (balsa wood :) )foregrip, a 9volt Coca Cola Bottle, and a barrel made of the finest underground sprinkler piping. I'm supprised it has an asa adapter on it! |
|
|
|
HOME |
|
|
|
|
|