Projecting USFWS to Lambert Conformal Conic
Arc: project cover alam alam_lam
**************************************************
* The INPUT projection has been defined. *
**************************************************
Use OUTPUT to define the output projection and END
to finish.
Project: output
Project: projection lambert
Project: units meters
Project: parameters
1st standard parallel [ 0 0 0.000 ]: 40 20 0
2nd standard parallel [ 0 0 0.000 ]: 37 40 0
central meridian [ 0 0 0.000 ]: -105 30 0
latitude of projection's origin [ 0 0 0.000 ]: 0 0 0
false easting (meters) [ 0.00000 ]: 0.0
false northing (meters) [ 0.00000 ]: 0.0
Fixing CDOT Arc/Info coverages - county, urban, rest, hwy:
Arc: copy county countyx
prompt> cd /countyx
prompt> rm prj
Arc: project cover countyx county_lam
Please define the input and output map projections.
Use INPUT to define the input projection, OUTPUT
to define the output projection, and END to finish.
Project: input
Project: projection utm
Project: zone 13
Project: datum nad83
Project: spheroid grs1980
Project: yshift 4000000
Project: units meters
Project: parameters
Project: output
Project: projection lambert
Project: datum nad83
Project: spheroid grs1980
Project: units meters
Project: parameters
1st standard parallel [ 0 0 0.000 ]: 40 20 0
2nd standard parallel [ 0 0 0.000 ]: 37 40 0
central meridian [ 0 0 0.000 ]: -105 30 0
latitude of projection's origin [ 0 0 0.000 ]: 0 0 0
false easting (meters) [ 0.00000 ]: 0.0
false northing (meters) [ 0.00000 ]: 0.0
Project: end
Builds:
Arc: build urban_lam
Building polygons...
Arc: build hwy_lam line
Building lines...
Arc: build rest_lam point
Building points...
Arc: build county_lam line
Building lines...
Arc: build alam_lam poly
Building polygons...
Re-building AAT...