| allow on 6699 top option you may need to configure you firewall/router to allow this settings\in/out Udp Packets allow on 6257 to option you may need to configure you firewall/router to allow this **** winmx needs to be restarted if you allow these **** NOW FOR A WORD OF WARNING. Only choose to make a primary connection if you have a cable/DSL/T1+ if you dont making...... a primary connection will by default take up 10.5k Incoming and 7k Outgoing bandwidth on your system, and it doesnt take a genius to work out that on a 56k connection that doesnt leave you with very much to upload/download with. If you haven't got a cable/DSL or T1+ connection dont even think about telling WinMX that you have because you will be the one that suffers with hardly any bandwidth for your own use. You can select to connect as primary or secondary from the network button, if the option doesnt appear its becase your connection is too slow to support it. hosting also uses extra system ram/resources thanks to >>>>BH-Demon @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ G.B is 128kbps upstream cable and 512kbps down @ @ allowing tcp 16699 and udp 16257 @ @ hosting with bandwidths unticked @ @ and allowing 1 upload only @ @ >>>>> gives 7k/s out @ @ >>>>> gets 40k/s down @ @ @ @ bottom right of chat room [commands] button @ @ @ @ /topic <<<<this sets the room topic @ @ @ @ /setmotd <<<<this sets a message of the day for @ @ ppl entering the room.... @ @ host doesnt see the message... @ @ or the changes to it.... @ @ (would be nice if this was fixed) @ @ @ @ /limit <<<< sets the room limit...no of users @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
| Hosting a Room |