This series of sabers is a step up from the Apprentice series. These sabers typically have a dual tube hilt design with cutouts in the outer shell allowing the grip material to be exposed. This series is slightly larger in diameter, and a bit heavier too.
Cost for a hilt with all electronics installed ranges from $140 to $180 depending on selected options. Blades are $35 extra.
Note: Brass hilts are going to be about $20 to $30 higher than chrome due to increased supply costs.
1. Imperial Knight. Slant-cut emitter with blade holder exposed, one large cutout for the grip section.
And in brass.
2. Dual shroud emitter, narrow neck, slotted grips.
With 2 large grip windows.
3. Master Spiked Saber. Dual tube design witha row of spikes around the emitter and a narrow neck.
4. Some alternate spike options.
5. The Vos Saber.
6. Master Shadow Saber. With attached covertech clip. Features three long cutouts in the shroud.
7. Ultimate Spiked Saber. Over 15" long with dual Imperial Knight grips and two rings of spikes offset around the emitter. This is a weapon even without a blade!
8. A curvier Vos saber.
9. The Snow Vos.
10. Stormtrooper Saber.
