The mold for this console comes off of a stock GM console to insure an accurate fit.
The console will be covered in tweed to match JD's plans for an all black and silver/grey interior.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
| JD's Center Console Project | ||||||||||||
| This project will consist of a fiberglass console that will house 6 gauges and a switchbox for JD's air suspension. The mold for this console comes off of a stock GM console to insure an accurate fit. The console will be covered in tweed to match JD's plans for an all black and silver/grey interior. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
| The console was choped down about 3" to acquire the correct height JD was looking for. | ||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
| I began smoothing out the fiberglass console with fiberfill and at the same time made a template to create the box that JD's switchbox will set in. Once the fiberglass box was completed and pulled off the mold, a cutout was made in the top of the armrest to the exact size of the box to insure a proper fit. | ||||||||||||
|
||||||||||||
|
||||||||||||
| More Pictures Here! | ||||||||||||