|
The head is made with milliput, plastic sheet, brass rod and marble. Back half of original kit part is retained for to ensure the width of the head do not go out of proportion.
The 60mm vulcan barrels on the head unit are made with Styrene rods painted with Mr metal color. Springs and female connector pins are inserted into the bottom of the head. The base of the neck are detailed with parts from sparebox as well as solder wires.
Head pull out slightly to expose the mounting pin. The head is mounted to the body by the gold color connector pin. Also visible are two glass rods to simulate pistons behind the neck.
|
|
|
