Pine Hill Pottery's Fast-fire Kiln
The Kiln
[email protected]
The wood-fired kiln site is  located 30 feet  NW of the Studio space and  is of the "Olsen Fast-Fire" variety, with a 2x3x3' stacking space.

The work is fired over an 12 hour firing cycle, using wood for fuel. The appeal of this type of firing has a lot to do with the surface qualities that the flame and wood ash contribute to each piece. The heat and carbon of the flame create blushing affects and color transitions that are unique on each piece of pottery. The wood ash that introduces itself to the atmoshere plays a unique roll. Ash can create a glaze all by itself and affects the results of glazed and unglazed pottery in unique and appealing ways.

A 16X24 kiln shelter has been constructed over the site to protect both kiln and stockpiled wood from the elements.
Firebox
(fed alternately)
Slab Wood
purchased from a local sawmill, $15 for 2/3 cord.
The amount seen here should fuel the kiln for two or three firings.
Gaylen Peterson
Potter/Instructor
Kiln at Start-up
A small fire is going in the rear firebox. The door is bricked up with two peep holes left open.
The Clay
The Glazes
Wood-fire Kiln
The Showroom
Studio Space
The Clay
The Glazes
The Kiln
The Showroom
Studio Space
MAP to Pine Hill Pottery
Fire Shot
Above 1800 F, flame appears from the chimney with each stoking. It appears this way until 2350 F is achieved.
Kiln Under Construction 1
Kiln Under Construction 2
Workshops offered:
Adults               Students (3-12)
Pictures:
Building the "Fast-Fire" Kiln
Raku Kiln
Hosted by www.Geocities.ws

1