Steel shot blasting: is used to roughen surfaces in preperation for the applications of sealers, Stains, coatings,
or polymer overlays. this method may be also be used to remove some existing coatings , adhesivesor to provide a non slip profile. This method cleans and profiles concrete surfaces by removing dirt, laitance, curing compounds, sealers, or other contaminants in preparation for the application of protective materials.
Shot blasting systems produce very little airborne dust or contamination. All Concrete Claning inc. Models can be fitted with a hepa filterto lower the leval of airborne dust. Various profiles can be obtained by using different shot sizes, machine travel speed, and the amount abrasive thrown.
Crack Repair : The FDA requires that any crack or joint in food warehouses thatr are larger than one thirty second inch to be filled with approved material. Unfilled cracks may damage forklift wheels and other parts of the lift due to jarring while traversing the rough areas.
Control Joint filling : Unfilled control joints can cause spalling and detoriation of joint edges and intersections. If the joints are left unfilled, Food, dirt, grease and grime can be trapped in making it harder for sweeping and rodents habitat.
Flatness Grinding : Uneven floors can cause pallet spilling, warehouse product displacement, forklift damage.
Pressure Grouting : If slabs move due to poor compacting or curling, grout can be pumped under the concrete to stabelize the edges from breaking or cracking.
|
