$20 of of ebay for this?
id like to first say this copyright he has on here is illegal
since he stole all graphjics and how to info
do not buy from this asshole
if he researtched what he was selling he would know it doesnt
work on 99cavaliers
Folding Trunk Lid
By Hot_importz1950
Copyright 2002 All rights reserved
* This job requires drilling and should
be done with much precaution to prevent injuries and or damage to the vehicle.
needed:
· 6 screws
· 2 hinges
· 6 washers
Before After
Step 1: To begin, open your trunk and mark the placement of the
top of each stock trunk brackets (2 long piece of metal that allow the trunk
to open and close)CHECK OUT PICTURE 1-2
Step 2: Once that's done, remove the four bolts that hold your
trunk to those brackets. You should now be able to take off your trunk lid
completely.CHECK OUT PICTURE 1-2
Step 3: Take the hinges included in the package, the ones with
the flat sides and attach them to your trunk lid. Make sure that the bottom
of the hinge is facing down.CHECK OUT PICTURE 3
Step 4: Mark the holes (from the curved hinges) on the stock
brackets. Once that's done, drill all the necessary holes. Now reinstall
the trunk lid to the stock brackets using the curved hinges included in
the package. CHECK OUT PICTURE 4
Here is an example picture of what the kit should look like once
it's installed
back