A control panel to allow manual setting of the ReplayTV clock

To install:

1) remove the hard drive from the ReplayTV
2) connect the hard drive to a PC
3) boot in Windows 2000 or from the rtvpatch linux bootdisk
4) bring up a command prompt
5) cd to the directory containing simple-settime.panel
6) run "extract_rtv -p1 -e sys1/Customize/p-credits.panel"
7) run "extract_rtv -p1 -w sys1/Customize/p-credits.panel simple-settime.panel"
   answer "Y" to the overwrite prompt
8) run "extract_rtv -p1 -w sys2/Customize/p-credits.panel simple-settime.panel"
   answer "Y" to the overwrite prompt
9) shut down the computer
10) put the drive back in the ReplayTV

To use:

1) Menu
2) Setup
3) Change Display Brightness
4) Enter "888" and press the ReplayZones button on the remote
5) Enter the time and date using the format
   hour minute second month day year
   where the time setting is in _GMT_ and NOT IN LOCAL TIME
   if you enter the local time you will get a time of 4 to 8 hours off!!!
   (use the FF button to insert spaces)
6) Press the Select button on the remote
7) When prompted, hold down the front panel power button until it reboots




Alternative time set method (only for build 107 software!!!):

The script also has support for a hack (thanks to Sean Riddle) 
which re-enables the Set Date&Time button on the 777-Zones screen. 
This 777-Zones hack will only work in build 107 software!!!!
It pokes a value into memory to allow the Set Date&Time button to appear.
To use this hack, press the "Record" button in the hacked panel, and then
"Exit" out of all of the menus, and press 777-Zones to access the
Set Date&Time button.  The button will remain enabled until you reboot.

The time zone setting there doesn't update the display properly so you have
to play with it to figure out what time zone is what.  On my machine it
defaults to Pacific, and six right arrow presses get to EST.  Once you 
know how many button presses it takes to get to your zone, just write 
down the number and use that.


The settime-plus.panel file is a longer version of the simple-settime.panel
and has more features.  Because it is longer than the original
p-credits.panel file, you may have problems over-writing the p-credits.panel
file with settime-plus.panel.  If so, then just use the simple-settime.panel
file as described above.

The settime-plus.panel hack panel has a number of other hidden features 
that can be changed as well.  To change settings, use the Up/Down cursor 
movement remote buttons to select the setting line, and then use the 
Left/Right cursor movement remote buttons to set the setting the way 
you want it.  Press the "Select" button to save the change.




