 |
| Heres the gauge assembly that I am using on this bike. I took the stock tach and speedo, took them apart and I made a single bucket for both of the mechanisms to reside in. The indicator lights are LED's. The needles will probably have the "zero's" where they are pointed at in the picture. |
 |
| Heres how the gauges look installed. I moved the reset knob from the bottom to the side. |
 |
| Heres the bike with a Mac exhaust. The seat pan has a new foam on it and will be trimmed. |
 |
| I made a set of aluminum cam end covers to get rid of the bulk that the stock items have. Below the carbs are the stock items and the custom item for comparison. Also shown are the adaptors for the 34mm Flatslides. |
| The stock side covers have been used, but they now sit about 1.5 inches in farther than stock |