 |
| Feb. 5, 04 //Here is the starting point, a 1968 Honda CL 450. I have already installed new fork tubes and a fork brace. The plan is to end up with a Bobber style vintage chopper. The hard tail section is in the process of being installed. Stop back for updates when they arrive. |
| Feb 22,04 // The hardtail section, handlebars,Chrome headlight, fork braces and a gas tank off a 2003 Harley have been added. It now has a different front fender and the rear fender support will be redesigned. The ignition switch will be in the tank where the fuel gauge was. |
 |
| Feb 27,04// The rear fender brace has been changed and a different tail light is now being used. The seat is my own design and uses a single shock to tame the hardtail rear end. This set up looks alot cleaner than the conventional dual 3 inch springs seen on many choppers. It is sitting a little high right now (This is where it would be for my weight, it compresses to the correct riding height when sat on) but it is very adjustable (3 height positions for the bottom mount and 5 for the top mount and 4 positions for the springs). A different front fender has been mounted. This bike may have both stock foot peg controls and highway controls. The bike will be low and lean and will probably be painted black. The exhaust has been fabricated and the front pipe needs to be trimmed.. |
 |