Metal Core Wheels: Materials: Tech Bike Cranks Dremel Dremel cutting blade Extacto Knife (Razor blade) Sprinkler Lines Directions: Step 1: Get 4 Tech Bike cranks Step 2: Use your Dremel with cutting blade to cut the arms off of the cranks Step 3: Smoothen thecrank where you cut the arm off on each crank so that its perfectly round and smooth when rolling Step 4: Then Cut 4 peices of Sprinkler Lines into the same with as the wheel. Step 5: Push the line around the top of the metal core. Step 6: Use super Glue and glue the edges of the metal core to the sprinkler lines. Facts: These metal core wheels i kind of took an idea of mine and the Moshmellowz rubber wheel mod. I figured that the tech bike cranks would be good for metal wheels (as seen below) and i saw the Moshmellow wheel mod of the site and wanted to make a set, so i figured innovate a little more with a metal core. they roll smoother, faster and with the rubber its a softer and smoother ride as well. This only took me about a half hour to make. More Pictures Here: View Gallery>> |
More To Come HOME>> |