 |
 |
 |
| I would like to give a special thanks to all who have made this Project work without you this would not be a reality. Kyle Felts Rod McAllister Bob Stephenson Donnie Good Jon Prevost Crystal Felts |
 |
 |
| GM Crate 350 Shortblock Vortec Heads .550 lift Springs Hydroutectic Pistons W/9.6 to1 Compression Ratio 2 Bolt Block LT4 Rods and LT4 Cam |
 |
 |
| Here is the Finished Job. The paint looks so good and I am finnaly getting to drive this beast on a daily basis. I will be sure to look for all Ricers with "naws" and the Ford bunch. Future mods: 1 100hp shot of NITROUS 2 Gm LT-4 Hot Cam 525/525 lift 218/228 duration These should bring me to the 500hp mark on the bottle and about 400hp off. |
| OK now we take the gloves off and come out fighting. Removal of the Holley 670 TBI and install a Holley Street Avenger 770 cfm. Vacc. secondary with 69 primary and 72 secondary jetting 1 inch plastic spacer Edelbrock strut tower brace. |