Speed - 8
Torque - 7
Armor - 6
Weapon - 1
Team Omegaforce's latest lightweight lifting rammer in a series of 3. This bot features the extreme traction of 6 wheel drive introduced in the first SWAT, but in a set-up using 6 individual planetary gear motors as opposed to its predecessor's dual motor chain and sprocket drive. These 6 TORK EM12 motors provide a combined 7.2 HP, and a top speed of 29 feet per second. This version's wheelbase is also 3 inches wider than SWAT 2's, and one inch longer than SWAT's. This provides exceptional traction and maneuverability. SWAT 3's armor was also heavily redesigned. The front, which on previous versions contained protruding wedges and claws, was streamlined into a very clean V-Plow shape. This change was made to allow SWAT 3 to have unsurpassed defense against spinners. Furthering its tough new exterior is a single piece armor plate design which wraps the front and sides, replacing the old four-piece armor. Not only does this make it more resistant to breaking, it also is nearly impossible to knock off, since it is bolted on 3 sides at multiple angles. The front and side armor plate is 5/8" 6061 aluminum with a one inch spaced 1/2" aluminum secondary plate up front. The rest of the chassis is 1/2" 6061 aluminum polished and powdercoated dark blue. The weapon is also 5/8" 6061 aluminum, with weight reduction holes in the top plate and trusses. The front plate and trusses are left solid to withstand more damage and stress. The whole arm assembly fits flush into the body and actuates in about 6/10 of a second. It uses a speed modified EM12 actuator, allowing it to lift 60 pounds to 10" in just over one second. It doesn't have nearly enough power to flip an opponent with the arm alone, but when combined with the force of the drivetrain and shape of the arm, it provides a powerful ramming flip. The antenna on top has a flex base to keep it from hindering motion when inverted.