The modified SATA-cable; I put metal epoxy on the solder pin’s and wires.

 

 

 

The breakout metal from the PCI card; and a view of the cable fix; Size: 26 x 13 mm.

 

 

 

The final cable fix; Size:  cutout 6 x 10 mm.

Bend it 6 mm. from the edge and drill a 2 mm. hole in the middle.

 

Drill a 2 mm. hole; make sure you not drill in the motherboard.

 

 

 

Fix the cable; use a screw DIN7981 size 2.9 x 9.5 mm.

Bend the 1.5 mm flap’s down over the connector.

 

 

The cable can enter the box on top of PCI.