Hit's since March/04/04
Normal: This is just the normal typical gear that just controls the direction of spin (as do all gears). This gear comes in two forms the clip version found on blades such as galeon and dragoon s and the screw version found on blades like grip attacker and draciel metal ball defencer.
BEE
Right clip gear BEE Right screw gear
Neo sg: The neo spin gear is just simply a clip gear that has been redesigned. It is now much easier to put together since it only consists of three parts and may be found on blades such as dragoon V2.
Neo sg note the difference between it and the origanal clip
gear
Metal weight: This is constructed in the same way as the neo sg gear, except there is a large chunk of nonmagnetic metal in the centre to add weight hence the name metal weight.
just like the sg gear but has a non magnetic metal in the
centre
Mg Gear: These are only useful in an mg stadium or with magnets that are sold seperatly.
Mg south: If u have a north mg gear then when your blade spins over the magnet it will be drawn to it so will stay there even when hit it will still move back to the magnet so this is more suited to defence types.
core of south gear
core of north gear
Mg north:BEEWhen a south gear comes near a magnet it will push away from the magnet so your blade will be pushed away, by placing the magnets in different positions u can make your blade move in different ways so this is more suited to attack types.BEE
Patterns produced by usind a south mg gear
and magnets.
E.g. gear: E.G. stands for engine gear. Once the blade is launched, centrifugal force pulls a mechanism inside the base and hits the button of the E.G. core. This in turn gives the Blade a sudden speed boost, which in turn increases defence and endurance. To get the full effect of the gear use the tool that is provided with the blade to wind it up ready for battle. The problem with the gear is that it can go way out of control after a boost. Picture 1 shows how you wind up the gear and the arrow is pointing to the tool that is used and picture 2a is an actual E.g. gear, it is a left spin gear from a Dragoon G. Picture 2b is a right E.g. gear, it is from a Driger G. Look at the difference between the two tips.
1)
2a) 2b)
E.g. Series Metal Weight Gear: The core of this gear is exactly the same as the M.g. Metal Weight gear the only difference is the outer casing with is designed for E.g. series blade bases. Since the cores are the same in theory you could place a M.g. core iside this gear to turn an E.g. series blade into a M.g. blade.
Affiliates
Signed in
Utilities