Hit's since March/04/04
Remember having more then one weight disk is illegal, so don't use them in tournaments.
2 Weight Disks
Method 1
What you need:
Two 8-balance weight disks, a small round base and an attack ring that has a sub attack ring. (Left spin gear may be required)
8-balance
Process:
First of all get one of the 8-balance weight disks and put it on the base with the side that has the small circle cut out facing down. Then push the weight disk down until you hear a click or it won�t go down ant further. Then get your second weight disk and put it on but make sure the side with the circle cut out is facing up this time. Finally get your attack ring and remove the sub attack ring then put it on as usual and you will have a two weight disked blade. If the attack ring won�t go on then try pushing it down wile you turn. If it still won�t go on try using a left spin gear.
Bases that are compatible:
Master Driger, Master Dragoon, Wolborg, Wing Defender, Bearing Stinger, Driger f, Galeon and Auto-Change Balancer. These are only a few there are more and some other blades have the same bases as the ones listed above.
Attack Rings that are compatible:
Galeon, Galman, Galzzly and Gaia Dragoon V. these are only a few examples.
Two-8-balance weight disks
Method 2
What you need: Blade with screw spin gear, 2 weights and an attack ring.
Process: All you need to do for this one is get your base and gear then loosen the screw so the top part of the gear is higher making your gear taller. Then put your weight disks on and your attack ring.
Method 3
What you need: Round base and Zinrai/Hayate weight disk.
Process: First of get your pre-assembled blade (with a round base). Then get the Zinrai/Hayate weight disk and attach it round the base (use glue blu tack tape etc). Now you have a 2-weight disk blade. If you have an mg weight disk then this will work well since the Zinrai/Hayate weight disk is magnetic it will increase the mg power.
Bases that are compatible:
Most of the ones mentioned in method 1 in this section.
Zinrai/Hayate weight disk
3 Weight Disks
Method 1
What you need: Two 8-balance weight disks, a small round base, an attack ring that has a sub attack ring and a Zinrai/Hayate weight disk. (Left spin gear may be required)
Process: Combine method 1 and method 3 of the 2-weight disk section.
Method 2
What you need: Screw spin gear base, two screw spin gears and 3 weight disks.
Process: Get your base and put the first spin gear on the place the second gear on top of the first but make sure they are aligned. Then find something to keep it all together u can use a large screw or nail, super glue (or any other suitable glue), blu tack or anything else you can think of. Then simply place your 4 weight disks and your attack ring and that is it.
4 Weight Disks
Method 1
What you need: Screw spin gear round base, two screw spin gears, 4 weight disks and Zinrai/Hayate weight disk
Process: combine method 2 in the 3Weight Disks section with Method 2 in the
2 Weight Disks section.
5 Weight Disks
Method 1
What you need: Screw spin gear round base, two screw spin gears, four 8-balance weight disks and Zinrai/Hayate weight disk.
Process: combine method in 2the 3 Weight Disks section with Method 1 in the 2 Weight Disks section and method 2 in the 2 Weight Disks section
Leoshop Method
Introduce To Beyblade Redo Process
Process case 1:
Basic body is beyblade item no 17 "Fly DRAGON"
Progress 1: fire weight disc, middle weight disc and FLY DRAGON heavy disc total amount 3 pcs discs.
Progress 2: Needed 2 pcs spin gear.
Progress 3: On the top of half bottom in axis is needed to cut off and add peach axle on axis
Process case 2:
Basic body is beyblade item no 2
Progress 1: need 2 pcs fire weight discs and Beyblade item no 2 self disc total amount 3 pcs discs.
Progress 2: On the top of half bottom in axis is needed to cut off
Affiliates
Signed in
Utilities