Serial:

During installation choose "Licensed - I have a key" and type in the key below:

0.  Disconnect your internet connection.

1.  Install (no serial required). 

2.  Before running, copy the file SniperElite.exe from the \Registration\ folder on the DVD to the game installation folder on your hard drive, over-writing the file of the same name.  -- That's it!

3.  NOTE:  When the game runs, it attempts to connect to a website on the internet.  Since the purpose of this connection is unclear, it is advised to block internet access by unplugging or by using a software firewall.

0.  Before installation turn off all antivirus programs, antispyware programs, firewalls, etc--especially those by Symantec/Norton.  Use Windows Task Manager to kill all nonessential running processes.  (You should have almost no icons left in the Windows System Tray.)

1.  Install Solidworks 2005 using the Serial Number/Registration combination below corresponding to the version of Solidworks you wish to install.  (Example:  6788 0456 6685 1707 and T10LW48M are the two numbers you would use for a basic version of Solidworks.) Answer "No" to the Customer Feedback option.  At the end do not click on "Connect."  Instead, uncheck the "Run Solidworks" box; then click on "Done."  Finally close the installation screen if it is still open. 

NOTE:  If at the end of the installation process you receive "Error 1406" about not being able to write a value to the registry key \Software, you still have a running process that is interfering:  Go back to Step 0 above and be more thorough in shutting down all running background processes. 

 

SolidWorks:   6788 0456 6685 1707

PhotoWorks:   5440 1456 6685 6143

FeatureWorks: 0413 3807 5662 5634

Piping:       0669 0944 0908 0437

Animator:     0504 0058 0183 0950

Utilities:    0507 0712 0491 0031

Inst Website: 0052 0107 0541 0713

ToolBox:      0393 0492 0231 0597

MoldBase:     0389 0433 0885 0503

Registration: T10LW48M

SolidWorks:   3840 0400 8634 4076

PhotoWorks:   8800 1400 8634 3539

FeatureWorks: 0079 1643 0340 7485

Piping:       0391 0751 0202 0234

Animator:     0241 0868 0003 0192

Utilities:    0256 0528 0581 0270

Inst Website: 0714 0445 0195 0450

ToolBox:      0145 0902 0583 0248

MoldBase:     0060 0234 0440 0303

Registration: 21K1FA37

 

SolidWorks:   2200 0404 2341 9161

PhotoWorks:   3900 1404 2341 2724

FeatureWorks: 1034 4091 4413 4746

Piping:       0146 0109 0191 0216

Animator:     0223 0687 0960 0238

Utilities:    0367 0403 0471 0621

Inst Website: 0497 0115 0047 0110

ToolBox:      0196 0327 0471 0656

MoldBase:     0962 0636 0293 0572

Registration: F90GI32P

Register with following serial:

0.  Disconnect from the internet.

1.  Install.

2.  Register Acid 5.0 with the keygen found in the \Registration\ folder on CD1.  (Scroll to the Acid 5.0 entry - do not use the default Vegas 5.0 setting!)

3.  If needed, use the keygen to generate codes for the AC-3 Encoder 1.0, the MP3 Plug-In 2.0 and/or the MC MPEG Plug-In 1.0.  Then do Step 4 for each app.

4.  For the AC-3 Encoder 1.0, edit the file ac3.reg (located in the \Registration\ folder on CD1) using Notepad to replace the string "enter-your-serial-here" with the code from the keygen, leaving the quote marks in place; then save the edited file.  Double-click on the new ac3.reg to enter the registration info into your Windows registry. 

5.  Repeat step 4 above, editing mp3.reg and mpeg.reg to register the MP3 Plug-In 2.0 and the MC MPEG Plug-In 1.0.  That's it! 

NOTE:  It is recommended to use a software firewall (such as ZoneAlarm) to prevent Acid Pro 5 from accesssing the internet (as it may attempt to do when it runs).

 

1.  Run Setup.exe to install the Software.

2.  Double-click on "sf.reg" in the \Registration folder on the CD, and answer Yes to the "Are you sure" question.

3.  Copy the "Shared Plug-Ins" and "Sound Forge 7.0" folders over to the installed folder on your hard drive, replacing all original files.

4.  Click "Register Later" when you run the app.  That's it!

5. Note:  It is suggested to block Internet access as in Step 0 above whenever running the Software for reasons of privacy and security.

1.  Install. 

2.  Register with serial/activation code generated by Keygen.exe located in the \Registration\ folder on the CD.  (You need to go through "..From Another Computer" activation method). 

3.  If you need to activate ac3/mp3/mpeg plug-ins, also use "...From Another Computer" activation (can be found in "File" -> "Save As" -> select output format -> press "Custom" button) and register plug-ins with codes from the keygen. 

4.  Special note for folks who find that plug-ins registration is not working: It's written everywhere what do you need exactly - serial or activation.  Read the info!  For these who still have trouble: you need activation, not serial.

 

0.  Close down your internet connection.

1.  Install the software. 

2.  Run Register.exe from the \Registration\ folder on CD1 to activate the software.  Choose 'Register from an other computer' for activation.

 

 

NOTE:  It is suggested to install the software first as a trial.  After installing, run as a trial and block your internet connection; then register using one of the S/N + REG combinations below.  Afterwards restore your internet connect to normal. 

S/N:  G4375514-339115A4

REG:  EWS2T05Q

or

S/N:  G4825588-4801743G

REG: 521Q0TQG

 

1.  Copy KEYGEN.EXE from the \REGISTER\ folder on the CD to your destop.  

2.  Install Act! using KEYGEN.EXE to register.

3.  Close and restart Act!  Then restart your internet connection. 

 

Use any User Name

S/n: SC8-231106-1623195-RGLR

 

0.  Turn off your internet connection and install the software.  After installation, browse CD contents and go to the \Registration\ folder, which contains four (4) files.  With the program not running, perform the following actions with these files:

1-2.  Copy SystranServer.exe and libxslt.dll to the Systran installation folder on your hard drive.  Confirm

yes to overwrite the existing files of the same name. 

3.  Copy prv_ee_6_2_83.dll to : WINDOWS\system32\E177E04D548C4006A465EEB92D3DE021\Runtime\Objects  (You might not have a folder with this name exactly > E177E04D548C4006A465EEB92D3DE021, but you surely have something similar; browse for it and you'll find it.)  Confirm yes to overwrite.

4.  Copy 4F6PIQ1XDHF3R5YJCFTRDDVIGF to: WINDOWS\system32\E177E04D548C4006A465EEB92D3DE021\EC-License.  (Same as above.  If you dont find the "E177E04D548C4006A465EEB92D3DE021" folder, look for something similar.)  No need to Confirm anything here, as it's a new file.

5.  Restart your PC and enjoy!