Serial required for install:

Serial# CWP5200999999345303

0.  Close your internet connection by unplugging or

blocking with a software firewall such as Zonealarm.

Then install using using either method 1 or 2 below:

Method 1:  Install using the following numbers:

Serial number:  cwpp174687040

MP3 Creation Activation Code: 96F2A5F9

Video DVD Burning Activation Code: FAF9A0FF

Method 2:  Copy the file Register.exe from the folder

\REGISTRATION on the CD to your desktop.  Then

run it to generate sets of three (3) serial numbers to use as in Method 1 above. 

 

1) Run setup.exe to install.

2) Use the following serial with any name and company to register:    CWSP-4.00-444448-365496

3)  With the program not running, copy the file SONARPDR.EXE from the \REGISTRATION\ folder on the CD to the folder on your hard drive where Cakewalk Sonar was installed, overwriting the existing file of the same name.

 

1.  Disconnect from the internet.

2.  Use one of the following serial numbers to register the software.

3.  After installation, with the program NOT RUNNING, copy the file SONARPDR.EXE from the \Registration\ folder on the DVD to the folder on your hard drive where you installed the software, over-writing the existing file of the same name.  That's it. 

 

0.  Turn off your internet connection and keep it turned off until CA95 has been

completely installed.  The importance of this cannot be over-emphasized!

1.  After installation run KEYGEN.EXE from the \REGISTRATION\ folder in the \Installation Files\ folder on the DVD and keep it open on your desktop.

2.  Run CA95, and cancel out of the internet connecting process to get to the telephone

activation dialog.  Use the KEYGEN to generate the appropriate codes.  (You may have to open/reopen the KEYGEN window from the taskbar several times.  Copying the numbers to paper will speed the process.)

3.  Ignore any error messages about missing files/folders on first running the program.

4.  After running the program successfully and shutting it down, you may now turn your

internet connection back on. 

5.  Instructions for installing the Premium Content are on the DVD.

 

1.  Install by running the file setup.exe inside the \Install\ folder on the CD (not setup.exe or setup2.exe in the root directory on the CD).

2.  After installation, with the program not running, copy the two files Chief_Architect_10_Full.exe and Sx32w.dll from the \Registration\ folder on the CD to the folder on your hard drive where you installed the program, over-writing the files of the same name.  --That's it! 

 

 

0.  Disconnect from the internet. 

1) Run Setup.exe to install but do not reboot when prompted and do not run the program.

2) Copy Register.exe from the \Registration\ folder on the CD to the folder on your hard drive where you installed AnyDVD.

3) Run Register.exe and select the Crack option under CloneCD, then Patch, followed by exit.

4) Reboot your computer.  Keep your internet connection turned off. 

5) VERY IMPORTANT! -- Run the program, immediately go to Tools\Settings\CloneCD Update and uncheck the box to "Automatically check for new CloneCD Version," or it could happen that your installed version stops working!  You may now restore your internet connection. 

 

Install by running setup.exe.  Double-click the .reg file in the \REGISTRATION\ folder on the CD to install the key in your registry.  The program will now run as registered.

IMPORTANT:  Immediately after installing, go to "preferences" on the first screen and uncheck the box to "Automatically check for new CloneDVD version."  Slysoft issues frequent updates, and if this box is left checked, you may suddenly have a (possibly expired) trial version again.

 

0.  Disconnect from the internet. 

1.  Intall the software. 

2.  Double-click on CloneDVD.Key in the \Registration\ folder on the CD and add the information to the Windows registry.

3.  Run the software and immediately turn off the Autoupdate feature.  (See note for v2.7.5.1 above.)

4.  You may now reconnect to the internet. 

 

0) Disconnect from the internet!

1) Run Setup.exe to install, but do not reboot when prompted and do not run the program.

2) Copy Register.exe from the CD to the folder on your hard drive where you installed CloneDVD 2.

3) Run Register.exe and select the Crack option under CloneDVD and Patch followed by exit.

4) Reboot your computer.  Keep your internet connection turned off. 

5) VERY IMPORTANT! -- When first running the program, click on "Preferences" and immediately disable the feature "Automatically check for new program version," or it could happen that your installed version stops working!  You may now restore your internet connection.

1.  Install the app.

2.  Run Register.exe to generate a keyfile; then click on the "Save License" button and save the keyfile to the directory (folder) on your hard drive where you installed the program (probably C:\Program Files\Planetwide Games\Comic Book Creator).  Check to make sure that the file cbc01.lf has been saved to this folder.  If so, the next time you start the program it will run as registered.

1. Install the game.  (Note that you must have DirectX 9.0c on your computer to run the game, so if you do not already have it installed, now is a good time to do it!)

2. Copy the file CommXPC.exe from the from the \Registration\ folder on the DVD to the folder on your hard drive where you installed the game, over-writing the file of the same name.  -- That's it!

0.  Shut down internet access by unplugging or blocking with a software firewall such as ZoneAlarm.

1.  Install the software as a trial.

2.  With the program not running, copy the file PSIKey.dll from the \Registration\ folder on the CD to the <installdir>\programs folder on your hard drive (probably named "C:\Program Files\Corel\Corel DESIGNER Technical Suite 12\Programs.")  Make sure you drill down all the way to the 'Programs' folder:  You will have to answer "yes" to an "are-you-sure-you-want-to-do-this" question.

3.  That's it.  The trial nag will now be gone.

0.  Turn off your internet connection by either

physically unplugging or blocking with a software

firewall such as Zonealarm.

1.  Run SETUP.EXE to install Corel Painter IX.

2.  Copy/paste the file PATCH.EXE from the

\REGISTRATION\ folder on the CD to the folder

on your hard drive containing the file "Painter IX.exe"

(probably C:\Program Files\Corel\Corel Painter IX).

3.  Execute the patch to activate the software.  You

may now restore your internet connection. 

 

Install with this key:  WS12WCX-0203227-XWJ

Do not attempt to register the software.

 

0.  Disable your internet connection before installation and don't enable it back before you activate the program!

1.  Run Register.exe (a keygen) from the \Registration\ folder on the CD and KEEP IT OPEN ON YOUR DESKTOP!

1a.  NOTE:  You should never click on the "Generate" button--not ever!  It generates random serial numbers, and you want to stay with the original (default) serial that appears when the box first opens.  If you accidentally click on this button during installation/activation you must abort the whole process, uninstall and start over again from the beginning. 

2.  Install the app by running Setup.exe if the app does not autorun.  Note that there may be a rather long delay at this first step.  Be patient!

3.  During installation use the serial number from the keygen. Type it into the trial serial number box on the right.  (DO NOT COPY/PASTE!  This may appear to work, but the program will not recognize the pasted serial number and will not allow you to proceed.  You MUST type it in!)  DON'T CLOSE THE KEYGEN!

4.  When installation finishes, run WordPerfect when prompted.  (DO NOT select "Buy Now!")

5.  On the first run you'll be prompted to activate the software or start with trial.  Press "Already purchased".  Copy the serial from the keygen by hand once more into the "Please enter your key!" box; then click "Phone Corel".

6.  Copy the installation ID in the five boxes as one single number (without dashes!) into the keygen Installation Code box, and click on "Activate" (not "Generate") to produce your Activation Code. 

7.  Type (again, by hand!) the activation code from the bottom box back into the activation dialog in the app to activate it.  Voila! 

 

Serial: DR12WEX-1504397-KTY

1.  Install by running setup.exe.  (You may wish to change the default installation folder name and Program Manager name to eliminate the term “Trial.”)  A 15-day trial version will be installed.

2.  Before running the program, copy REGISTRATION\Cybscrub.exe from the CD to the installation folder on your hard drive, over-writing the existing file of the same name. 

3.  Voila!  The software will now run without the trial time limit.