plumbing on the internet. Information on how to find and
purchase plumbing.
The best place I found is to search here for bbq grills:
Save on plumbing at ebay?
plumbing. Looking for a name brand of plumbing.
Check routinely.
Mrs. Grey: "plumbing" say yes.
plumbing
Plumbing 101: Quick Tips to Keep Your Plumbing in Top Shape
- Although you may not feel qualified tto take on major plumbing installations or repairs around the house, there are many small things that you can easily do to repair, clean or maintain your plumbing.
How do you clear a clogged drain? What do you do to keep a faucet looking and running like new? How do you prepare for a plumbing emergency? What is the best way to clean fixtures? Read on for the answers to those questions as well as tips for maintaining your plumbing.
Be Prepared for a Plumbing Emergency
Homeowners hope they will never have to face a plumbing emergency, but the best time to prepare is before it happens.
"When water is spewing from a broken pipe or creeping slowly towards your carpet is not the time to be hunting for a water shut-off valve," says Mike Pickett, vice president, Product Development at Moen Incorporated. "Our plumbing experts first recommend making a plumbing discovery tour of your home. A few minutes of your time now can provide the assurance you need to handle a crisis down the road."
Make a Plumbing Discovery Tour
A "plumbing discovery tour" involves locating and clearly marking all shut-off valves in your home. First, find the main water shut-off valve. This valve is usually located in the basement on the pipe coming through the wall on the street side of your house (near the water meter). By shutting off this valve, you will shut off water to your entire house, which may be necessary for a serious emergency.
Be aware, though, that if you do shut off the water at the main valve, a gas hot water tank must be turned down to as low possible (find the control on the face of the tank and set it to the "vacation" setting). An electric tank should be shut off at the electrical panel. If you have a hot water heating system, you will also need to check that the furnace has a sufficient supply of water so it does not run dry.
During your tour, you also should note the locations of shut-off valves for other plumbing fixtures. Below your kitchen sink you will most likely find shut-off valves for both hot and cold water. In the bathroom, there are three primary valves operating the faucet, toilet and bathtub/shower. These valves are typically located below the fixtures for easy access, though the tub valve(s) may be in the basement (or behind the bathroom wall in a bedroom closet, for example).
Continue the tour in every room that has a plumbing-related appliance. Be sure to locate, test and tag valves to your washing machine, dishwasher, hot water heating system, water heater, refrigerator ice maker, water softener -- every place in the house where water is used.
Check the Condition of Your Valves
It is important to check all valves often since they may become "frozen" from lack of use. A wrench or some WD-40 carefully applied will probably loosen any stuck valves.
Leaks, Clogs and Other Problems
For more serious matters it is usually best to call a plumber, but there are some things you can do yourself to take care of small problems.
Clogged Drain
To clear a clogged drain, first try a plunger. If that does not remove the problem, use a hand auger, which is a flexible steel cable that can be pushed into the drain to break up the obstruction. Your next step of defense is to use a blow bag that hooks to a garden hose and uses water pressure to clear the clog. Use caustic, acid-based chemical drain cleaners only as a last resort since they may damage pipes.
Continuously Running Toilet
If water continuously runs in your toilet, it may be a problem with the float rising too high, causing water to trickle down the overflow tube. To fix this, bend the rod slightly downward so the float ball is lowered. If fixing that doesn't help, see if the trip lever chain is tangled or has fallen off. Next check the tank flapper at the base of the tank and the ballcock, which is located near the top of the tank. These items may have to be cleaned, adjusted or replaced if they have worn out.
Toilet Won't Flush
If a toilet won't flush, it is likely that the chain has slipped off or a new flush-handle assembly is needed. Start by examining the inside of the tank. Is one end of the chain attached to the flush handle and the other to a rubber seal at the bottom? If the chain has slipped off, reattach it. If the handle itself is broken, you will need to replace it with a new assembly.
Leaky Faucet
If you have a cartridge-type faucet, a leak usually indicates that the O-rings need to be replaced. This is a simple repair that even the novice do-it-yourselfer can perform. If the faucet leaks from the handle, the upper O-ring probably needs replacement, while a drip from the spout will indicate a problem with the O-ring at the base of the spout assembly. O-rings also form a seal between the hot and cold supply lines, so be sure to examine these once you have the faucet disassembled. When replacing O-rings, give them a light coating of heatproof lubricant. If replacing O-rings doesn't solve your problems, you may need to replace the cartridge itself.
A faucet that leaks at the base of the handle means that one or more of the inlet seals on the cartridge may need replacing. These seals can be easily replaced. You may also want to clean the inlet ports on this type of faucet since they can become clogged with mineral deposits. A complete cartridge replacement may be needed if leaking problems persist.
A rotating ball faucet is difficult to repair because of its many parts. You should first disassemble the cam, ball and spout to see if there are any problems there - many leaks result from a worn out ball or gasket. If those seem fine, remove seals and springs to check for blockages. Leaks also can spring from around the handle or from under the base of the spout. Handle leaks indicate that the adjusting ring has loosened or the seal above the ball is worn. Leaks from under the spout result from O-ring failure. Examine all O-rings encircling the body of the faucet to see if they look worn.
Hard-to-Move Faucet Handles
If you are having trouble turning your faucet on and off, you probably have a problem with mineral deposits. To solve this problem, simply clean the cartridge and apply a thin film of FSA-approved silicon grease -- never use petroleum jelly.
Basic Maintenance of Plumbing Fixtures
Faucets
One of the easiest plumbing fixtures to care for is a faucet -- the only things needed for cleaning are some water and a little elbow grease.
"Many people think you need to use a commercial cleansing product to clean a faucet, but the best thing is a soft, damp cloth and warm water," says Pickett. "To keep your faucet looking beautiful for years, you will want to stay away from abrasives and harsh cleaning materials. Occasionally applying a high-quality wax polish will further ensure the beauty of your faucet."
If water pressure seems low or the flow pattern is inconsistent, it is recommended that you clean the aerator (the round attachment at the end of the spout). This can be done by unscrewing the part, then using a toothbrush dipped in vinegar to remove dirt or trapped particles.
Composite Sinks
For minor stains on a composite sink, use warm water and mild dish soap. For more serious stains use a cleanser with bleach, though this type of product should not be used on a daily basis.
Hard water stains are best treated with white vinegar followed by a thorough rinsing, while yellowing due to calcium and lime deposits requires a de-liming solution. Polish your sink only with those products suitable for acrylic surfaces. Never use abrasive cleansers or even abrasive scrub pads.
Stainless Steel Sinks
If maintained properly, quality stainless steel sinks will not chip, peel, rust or discolor. For routine cleaning, use soap, ammonia or detergents with a soft sponge or cloth. Hard water spots can be removed with white vinegar and water, while persistent spots and stains may require a stainless steel cleaner or household cleanser. Never use steel wool pads for cleaning these sinks.
Homeowners should not use rubber mats with stainless steel sinks since residual water deposits and food particles trapped underneath these mats can cause sink discoloration. In addition, wet sponges, cloths and cleaning pads should not be left on the sink's surface. Many liquid hand soaps contain chemical additives that will affect the original shine of the finish if left to dry in your sink.
Showers
To clean a showerhead that seems to have lower water pressure, unscrew the swivel ball nut using a wrench (put electrical or duct tape on the flange to protect the fixture). Unscrew the collar nut from the showerhead and then clean the outlet and inlet holes with a thin wire. Anti-lime and calcium cleaners can also be used -- simply dip your showerhead in these products for easy cleaning.
Like faucets, shower fixture exteriors should be cleaned with warm water and a soft cloth to remove water spots.
Drains
Regular maintenance of drains will help reduce the risk of clogging. Flush drains bi-weekly with hot tap water, especially those drains that are not used often such as in a guest bathroom. Once every six months, use a non-caustic drain cleaner on all household drains.
To prevent lint from building up and eventually clogging drainpipes near the washing machine, put an old nylon stocking over the end of the rubber drain hose. This will trap all of the lint from your washing machine water before it reaches your drain, and should be changed as necessary.
Pipe Maintenance
There are a couple tricks of the trade that you can use for pipes in your home.
Prevent Pipes from Freezing
The best thing you can do to prevent frozen pipes is insulate them. Pipe jackets in standard lengths can be purchased at local home centers. For a less expensive alternative, you can cut regular insulation into strips and bundle it around pipes. If you use fiberglass insulation, however, be sure to wear gloves, long sleeves and long pants to avoid contact with the irritating particles that come off of this kind of insulation. These techniques will also stop noisy pipes from banging against wall studs or joists in your home.
Thawing a Frozen Pipe
If you do have a frozen pipe, you will need to thaw it using a heat gun or hair dryer. But keep these items on a low setting so the pipe doesn't overheat.
Find a 24-Hour Plumbing Contractor...Now
And finally, all homeowners know that if anything goes wrong in their home, it will pick the most inconvenient time to do so -- usually in the middle of the night or during a holiday. This makes it important to have the name of a reliable plumbing contractor offering 24-hour service for major emergencies. Although you can find names of plumbers in your local telephone directory, recommendations from friends or neighbors are generally better. A phone call (ahead of time) to ensure that the plumber is still in business and can provide 24-hour service is a good idea, and you may also check if a pager number is available for after-hour calls.
For more information about plumbing needs, contact Moen Incorporated, 25300 Al Moen Drive, North Olmsted, Ohio 44070, call (800) 553-6636, or visit the Web site at www.moen.com.
plumbing
Roto-Rooter Looks For Do-It-Yourselfers To Swallow Pride And Share Their Most Embarrassing Plumbing Mishaps
"Winner Wins Trip To NASCAR Race And Pit Crew Membership."
CINCINNATI, OH - Does your husband think he's Mr. Fix-It? Have you ever found yourself trying to be an expert handyman at home, only to create an expert disaster? Do you swear by super glue? If any of these are true, it is time to swallow your pride and share with everyone your most unremarkable do-it-yourself moments.
Too often homeowners try playing that handyman role just to realize they were in way over their heads. Roto-Rooter, America's Neighborhood Plumber(R), is calling on do-it-yourselfers to share those experiences for The Do-It-Yourself Disaster Contest. The contest is a nationwide search for the most unfortunate and humorous do-it-yourself plumbing mishap.
Roto-Rooter discovered this growing trend after arriving on the scene of countless do-it-yourself jobs "gone bad," and conducted a survey(1) . It discovered that a significant number of homeowners are tackling large plumbing and drain projects on their own. Survey results found that there is an increased involvement by homeowners in the everyday affairs of their homes' maintenance, but this interest can sometimes escalate into disastrous and costly situations.
"Plumbers get called into some sticky situations when people break out their toolboxes," says Dave Lohmann, master plumber and Roto-Rooter plumbing manager in Minneapolis. "This research substantiates people's eagerness to handle problems themselves despite the negative consequences that can result."
The survey of married homeowners discovered that nearly two-thirds of the respondents fixed plumbing or drain cleaning repairs themselves the last time they encountered such a problem. Only one out of five respondents called a professional from the start, while 6 percent attempted fixing either type of repair themselves, and then called a professional.
With regards to the reasoning behind do-it-yourself work, 47 percent of the respondents said that their primary motivation was saving money, 27 percent said they enjoy fixing things and convenience played a role for 20 percent of the respondents.
"Whatever the rationale for fixing a plumbing problem may be, some repairs are always best handled by professionals. Many of the repairs people are attempting are complicated. Some jobs even require a license or permit," Lohmann adds. "There is always a reason to be concerned when people play around with gas and electrical issues."
Homeowners across the country are constantly seeking less expensive ways to maintain and enhance their homes' value. Unfortunately, handling difficult and sensitive tasks around the house has become a common and sometimes dangerous trend.
"More than just about the funny stories that develop from do-it-yourself blunders, this contest is about knowing your limitations," comments Lohmann on the contest. "We would like for customers to call us before they attempt to solve any problems on their own. Most plumbers would be glad to give a couple of helpful hints, a diagnosis of the problem, and most of the time it does not result in anything too serious."
Contest Details
The Roto-Rooter Do-It-Yourself Disaster Contest, which runs until August 1, 2002, asks participants to submit a 150-word essay (and photo if possible) describing their funniest and most catastrophic do-it-yourself plumbing mishap. The entries will be judged based on the difficulty of the situation, creativity used in the solution and the magnitude of the disaster.
The contest winner will receive pit passes and pit crew membership of Steve Portenga's Roto-Rooter sponsored NASCAR Craftsman Series truck during the race at the Phoenix International Speedway on November 8, 2002.
Official entry forms can be found at local Roto-Rooter Branches across the United States and should be mailed to: Roto-Rooter Do-It-Yourself Disaster Contest, 225 N. Michigan Ave., Ste. 1900, Chicago, IL 60601. Entries can also be submitted online at www.roto-rooter.com.
All entries must be postmarked or received through the website by August 1, 2002, and must include the entrant's full name, age, address, phone number and essay describing the disaster.
Roto-Rooter was established in 1935 and is the largest provider of plumbing and drain cleaning services in the United State and Canada. Today, Roto-Rooter is a wholly owned subsidiary of Chemed. Roto-Rooter operates businesses in more than 100 company-owned territories and more than 500 franchise territories, serving approximately 90 percent of the U.S. population.
Survey conducted by Opinion Research Corporation on behalf of Roto-Rooter from April 19-22, 2002.
