SYNTHETIC AIR AND REFRIGERATOR COMPRESSOR OIL
SYNTHETIC AIR AND REFRIGERATOR COMPRESSOR OIL
DESCRIPTION
Oberon F226 is specially engineered with synthetic base oil and ashless additives that provide superior anti-wear, corrosion, oxidation, rust, foam and dispersant characteristics. Oberon F226 is specially recommended for food-processing equipment. It is also ideal for non-food applications.
CHARACTERISTICS
WIDE TEMPERATURE RANGE
Oberon F226 gives optimum results in temperature ranging from minus 45 degrees C (minus 49 degrees F) to 130 degrees C (266 degrees F). Oberon F226 is specially suitable for ultra-low temperature refrigeration due to its excellent low temperature characteristics, no wax content and low solubility and chemical stability in Freon and Ammonia refrigerants. Unlike conventional hydraulic oils that cannot be pumped as they solidify at very low temperatures, Oberon F226 is pumped down to minus 45 degrees C. Oberon F226 also excels in high temperature compressors where final compression temperatures are high or in units which have tendency to form deposits with comventional compressor oils.
SUPERIOR WEAR PROTECTION
Oberon F226 contains special anti-scuff mild Extrem Pressure (E.P.) additives that minimize wear and ensure that a lubricant film is maintained between surfaces in equipment operating under moderate load conditions.
EXCELLENT FILTERABILITY
Oberon F226 provides excellent protection against filter plugging which, if not controlled, can result in hydraulic pump failure due to inadequate lubricant supply. Oberon F226 contains powerful oxidation inhibitors and ashless additives that prevent the formation of filter deposits.
COMPATIBILITY
Oberon F226 is completely compatible with conventional mineral oils. In addition, no special precautions need to be taken with gasketing the equipment as these materials act in the same way as mineral oils.
LONGER SERVICE LIFE
Oxidation, if not cotrolled, degrades oil very quickly. The pure synthetic hydrocarbon base oils and powerful oxidation inhibitors in Oberon F226 greatly extend oil service life by effectively resisting oxidation.
APPLICATION
* food processing equipment (compressors, hydraulics, bearings, etc,)
* rotary vane screw
* reciprocating air compressors
* hydraulic pumps operating over 14000-kpa ( 14-bar, 2000psi)
* ultra-low temperature refrigeration systems
* circulating systems
* bearings and gearboxes where Extreme Pressure (E.P.) loads are not extreme
This information related only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best OBERON's knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.
Oberon Manufacturing Company Pte Ltd reserves the right to modify or change this product for purpose of improving its performance characteristics.
Copyright Reserved 2002