MULTI-PURPOSE INDUSTRIAL OIL CONCENTRATE
MULTI-PURPOSE INDUSTRIAL OIL CONCENTRATE
DESCRIPTION
Oberon A622 is specially formulated to prolong equipment and machinery life by reducing frictional wear and protect against rust and corrosion. It is developed for optimum performance and consistency under Extreme Pressure (E.P.), during high load operations.
CHARACTERISTICS
CONTAINS SPECIAL ADDITVES
Oberon A622 is enhanced with Extreme Pressure (E.P.), anti-wear and anti-oxidation additives to increase the oxidation resisting properties of the lubricant. In addition, oil change interval can be extended by 100% as Oberon A622 continues to protect long after conventional lubricants have oxidize or nullified due to heat and pressure.
CUTS DOWN FRICTION
Friction can adverssely affect machinery parts through the development of seizing, galling and shearing. Oberon A622 reduces friction and consequently operating temperatures by providing a protective oil film between metal surfaces. When heat fatigues in machines are reduced, the oils also becomes less prone to oxidation. Oberon A622 is smoother than the conventional lubricants, which enables it to reduce drag during operations. The results are increased power and extended service life of machines.
RESISTS CORROSION
Acid attacks on metals can be more damaging than frictional wear, which is why Oberon A622 is reinforced with extra protection against acidic corrosion.
CONTROLS EXCESSIVE HEAT
Oberon A622 is formulated with the extra ordinary ability to reduce excessive heat from its lubricating oil to maintain optimum lubricity. This allows Oberon A622 to control sludge and carbon that results from excessive heat.
VISCOSITY MAINTENANCE
Oberon A622 maintains the viscosity of an oil to ensure it does not thin or thicken in high or low temperatures.
UNIVERSAL APPLICATION
Oberon A622 can be used on all lubrication systems such as bath, wick feed, drip feed, closed circulation and hydraulic systems. Oberon A622 is aslo equally applicable to transmissions, vee drives, variators, reducers, transfers and gearboxes.
This information related only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best OBERON's knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.
Oberon Manufacturing Company Pte Ltd reserves the right to modify or change this product for purpose of improving its performance characteristics.
Copyright Reserved 2002