| ELMAT Automatic Injection Moulding Machine | |
|
|
|
| Dia of Screw | mm | 20 | 22 | 25 |
| Stroke of Screw | mm | 95 | ||
| Rate of Injection | G/sec. | 24 | 36 | 47 |
| Recovery Rate | G/Sec. | 8 | 10 | 13 |
| Stroke Volume of Screw | cm3 | 25 | 30 | 40 |
| Max weight of Injection | Gms. | 26 | 31 | 41 |
| Specific Injection Pressure | Kg/cm2 | 1815 | 1500 | 1160 |
| Stroke of Nozzel | mm | 175 | ||
| Nozzel Contact Pressure | MT | 2.2 | ||
| Heating Capacity | kw | 3 | ||
| Screw Speed | rpm | 10-300 | ||
| Locking force | MT | 20 | ||
| Stroke | mm | 200 | ||
| Mould platen total size h x v | mm | 320 X 320 | ||
| Distance between tie bars h x v | mm | 200 X 200 | ||
| Height of Mould Max. | mm | 250 | ||
| Height of Mould Min. | mm | 150 | ||
| Max. Day Light | mm | 450 | ||
| Diameter of Tie Bars | mm | 35 | ||
| Dry Cycle Performance | Sec. | 1 | ||
| Motor for Pump drive | Kw | 3.6 | ||
| Oil filing | Litr. | 120 | ||
|
© Copyrigth ELMAT |
|
|