Holy Name University
Electronics & Communications Engineering Online Review

Home    Mathematics    Communications Engineering    Links

         Electronics Engineering

Next >>>        


Problems VIII
  1. A source of 100V is applied across a 20W R1 and 30W R2 in series and V1 is 40V. The current in R2 is _____?
  2. A parallel circuit with 20V applied across two branches has a total line current of 5A. One branch resistance equals 5W. The other branch resistance equals _____?
  3. A capacitor is consists of two _____?
  4. The combination of two 0.02 mF capacitors in series has a capacitance of _____?
  5. How much is the total capacitance for 0.01 mF in parallel with 0.02 mF?
  6. Technically, what do we call a coil of wire?
  7. Alternating current can induce voltage because it has a _____?
  8. The current in an inductor changes from 12 to 16 amperes in 1 second. How much is the di/dt rate of change in Ampere per second?
  9. An open coil has _____?
  10. The rate at which the electrons pass a given point in the circuit determines the magnitudes of _____?
  11. Evaporation of electrons from a body of a solid at high temperature is known as _____?
  12. A kind of tube that uses a water-cooled plate but can be disassembled and repaired whenever the cathode burns out?
  13. The person who inserted a third element, on grid between the plate and the filament of the fleming valve and laid the foundation for some of the most notable achievements of the age in 19707?
  14. It was developed permanently to eliminate the grid-to-plate capacitance of a vacuum tube?
  15. The first or inner grid of a penthode tube is called _____?




Copyright, © 2001, dwct-ece review online. All Rights Reserved.

Hosted by www.Geocities.ws

1