Holy Name University
Electronics & Communications Engineering Online Review

Home    Mathematics    Electronics Engineering    Links

         Communications Engineering

Next >>>        


Problems IX
  1. Tuned transmission lines are _____?
  2. The magnetic and electric fields occur _____?
  3. The three components of the magnetic fields are in phase _____?
  4. A transmission line with characteristics impedance of 450W is terminated ina a purely resisteive load. It is found by measurement that the minimum value of voltage upon it is 7.5mv, and the maximum is 9mv. What is the value of load resistance?
  5. A (75-j50) ohm load is to be matched to a 75-ohm line to give SWR = 1. What is the characteristic impedance of the quarter-wave transformer, connected directly to the load?To couple a coaxial line to a parallel-wire, it is best to use a _____?
  6. The velocity factor of a transformer line _____?
  7. For transmission line matching over a range of frequencies, it is best to use a _____?
  8. Skin effects refers to what?
  9. Why is open-wire line still found in many telephone system appalication?
  10. What is the relationship between possible bandwidth and signal frequency?
  11. What type of cable would you choose if you wanted an inexpensive, long-distance, medium-bandwidth transmission link where several circuits ran in parallel?
  12. You are told that certain satellite uses transmissions in the 4/6 GHz band. What does that mean?
  13. What is the capacitance of 55 miles No. 4 copper wire spaced 18 inches? From wire tables, we find that No. 4 copper has a radius of 0.10215 in.
  14. If measurements are taken along transmission line with an oscilloscope when there are no standing waves, the pattern would appear as _____?




Copyright, © 2001, dwct-ece review online. All Rights Reserved.

Hosted by www.Geocities.ws

1