CHANGES - 1996/06/10

The following changes have been made since the release of the 
HamComm 3.0 shareware version:

 - Bugfix: AFC function: the AFC function did not work with very low
   tones combined with very wide shift setting.

 - Bugfix: AMTOR ARQ linkup routines did not recognize incoming calls
   for some letter combinations in the local selcall.

 - Bugfix: AMTOR FEC transmission was garbled if the protocol function
   (Ctrl-P) was turned off.

 - Bugfix: AMTOR ARQ: the WRU character (Alt-168) was transmitted twice.

 - Bugfix: menu selection did not always work with upper case letters.

 - Change: AMTOR ARQ Listen:
   * fine-tuning for better synchronization.
   * detection of repeated blocks improved.

 - Change: AMTOR FEC rx and tx mode now also use the clockcorr setting
   for precise timing.

 - Addition: AMTOR FEC: end-of-transmission indication now generated
   and recognized.

 - Addition: PACTOR Listen mode for decoding of PACTOR ARQ/FEC
   transmissions (registered version only).

 - Addition: SHIP/SYNOP reports:
   * decoding of cloud group 8NhCLCMCH in section 1.
   * in section 3 the 55SSS group (sunshine) and some 9SpSpspsp groups
     for "special phenomena" like "max gust" are decoded. 

 - Addition: SHIP reports: decoding of 70HwaHwaHwa group (wind wave
   height) in section 2 of SHIP reports.

 - Addition: RX/TX screen:
   * vertical tune indicator on left window border.
   * left-click on center frequency display field switches to TUNE
     screen.  
   * left-click on current frequency field switches to SPECTRUM
     screen.
   * left-click on normal/reverse field toggles the keying
     direction.
   * the rx and tx windows can be resized by moving the separator line
     with the mouse.
   * programmable mouse buttons for up to 16 assigned functions/actions
     (see HC31.CFG).

 - Addition: embedded commands for predefined texts (see HC31.CFG).

 - Addition: CHARacter entrymode for transmit window.

 - Addition: TUNE screen:
   * the HOME key or a left-click on the reset button changes the center
     frequency to the value set from the last processed .cfg file.
   * the center frequency can be set with a left-click on the lower
     frequency scale.
   * buttons for standard center frequencies of 1360Hz and 2210Hz.
   * flicker of frequency indicator reduced.

 - Addition: added characters for CW RX/TX:
   134 (), 143 () .__._
   145 (), 146 () ._._
            237 () ___.

 - Addition: CW decoding: 
   * automatic speed adjustment can be toggled with control-U or by
     selecting option "AutoWPM" from the SPEED menu.
   * AutoWPM can be set from .cfg files with command "set AutoWPM ..."

 - Addition: Printer support:
   * item "Log to printer" added to FILE menu.
   * printing can be controlled from .cfg files using command 
     "set printer ..."

 - Addition: Watchdog for timer 2: monitors operation of PC timer 2 to
   detect interference from other programms and restore the timer
   settings on-the-fly.  See command "set timercheck ..." in HC31.CFG.

 - Change: QTH menu deleted, selections moved to INFO menu.

 - Addition: new OPTIONS menu:
   * clear RX window.
   * clear TX window.
   * change clockcorr value. 

 - Addition: program file check on startup for virus detection.

 - Change: TEXT menu: SEND TEXT dialog box remains active after text
   has been send.  

 - Addition: logfile for transmit window (see HC31.CFG).

 - Addition: color/attribute selection for message line, window border,
   normal and highlighted text.
