DISKCLN.ZIP contains the following files.
12/11/98  10:24a    891 AUTOEXEC.BAT
02/10/98  01:16p     11 CONFIG.SYS
12/11/98  10:17a     52 n-active.scr
05/10/96  08:34a     40 README.BAT
12/11/98  10:47a  1,623 Readme.txt

CREATING THE DISK DEACTIVATOR DISKETTE
Extract the files in this .ZIP onto a Bootable Floppy Diskette which 
has DEBUG.EXE on it.  Be sure to over write the AUTOEXEC.BAT and 
CONFIG.SYS on the floppy with the ones in this ZIP.

WHAT THE DISK DEACTIVATOR DISKETTE DOES
The diskette simply runs 1 debug scripts, which will set all 
partitions on the primary IDE (master) hard drive to a
Non-Active state.  


USEING THE DISK CLEAN DISKETTE
To use the disk, simply boot to the disk and press [ENTER] at the prompt.

DISCLAIMER
I take no responsibility for the use or misuse of this utility.  The use of 
the utility will remove all data on all hard drives in your computer and that 
data may not be retrievable.  

Use extreme caution with this utility. The script files run very fast and you 
may not be able to stop the process before your drive has been 
deactivated.

Do not remove the "PAUSE" command from the AUTOEXEC.BAT.  This is the only 
safeguard that will allow you to abort the deactivation process.

DISTRIBUTION
This utility is not Public Domain.  However, you may distribute it freely as 
long as no modifications are preformed.  You may post the utility on an FTP, 
Web, BBS or other as long as a reference is made to the following WEB page 
disclosing where this utility originated:
http://www.geocities.com/ResearchTriangle/System/2014index.html
