| HOW TO MAKE THE DOOM MACHINE You will need: all parts are PVC 1......3" PVC Y (looks like a big y 2......3" PVC threaded end caps 2......3" PVC female threaded adapters 1......3" to 1.5" PVC reducer (also called a bushing) 1......4' piece of 1.5" PVC pipe (the barrel) 1......can of PVC pipe cement 1.....can of PVC primer 1......Electronic BBQ igniter CONSTRUCTION: 1. Take the peice of 1.5" PVC pipe and cut it to 4 feet, you can make it longer if you want. 2. Now prime the outside of the pipe you just cut and the inside of the 3" reducer. Slap some glue on the PVC that yoou primed and put them together so they are tight. 3. Now take the 3" y and prime it and the inside of the reducer. Put some more glue on them and glue them together. 4. Now take the threaded end caps and prime them and glue them up and stick them together. Now you have completed the body of the gun. 5. THE IGNITION SYSTEM-Drill a hole the size of your grill ignitor in the end cap of the extending y section, attatch the wires that came with the ignitor to two screws that you have installed into the side of your gun. Make sure that the screws are about .25-1" from the tips of each other. NOW YOUR DONE. Read the "Done with the gun, now your ready to fire" page on the instructions page. |
 |