RECOMMENDED SCHEDULE FOR INSPECTION AND MAINTENANCE SERVICES.
R - replace
I - Inspect and then adjust, correct or replace if necessary
P - perform recommended service for safe vehicle operation

MAINTENANCE INTERVAL (number of months or km / miles whichever comes first)

Remarks
Months 3 7.5 15 22.5 30 37.5 45 52.5 60
x1,000 km 4.8 12 24 26 48 60 72 84 96
x 1,000 miles 3 7.5 15 22.5 30 37.5 45 52.5 60
1 - Drive belt(s) [Except camshaft] (inspect drive belt tension         I       R
2 - Timing Belt (Camshaft Drive belt)         I       R
3 - Engine Oil R R R R R R R R R See #1
4 - Engine Oil Filter R R R R R R R R R
5 - Replace engine coolant and inspect cooling system, hoses and connections         P       P
6 - Replace fuel filter and inspect fuel system hoses and connections         (P)       P See # 2, 6 & 7
7 - Air filter elements         R       R
8 - Spark plug                 R
9 - Differential (front & rear) lubricants (gear oil)         I         See #3
10 - Automatic transmission fluid         I         See #4
11- Brake Fluid         R       R See #5
12 - Disc brake pad and disc, front and rear axle boots and axle shaft joints     I   I   I   I See #6
13 - brake linings and drums (parking break)         I       I See #6
14 - inspect brake line and check operation of parking and service brake system     P   P   P   P See #6
15 - steering and suspension     I   I   I   I See #6
16 - front and rear wheel bearing lubricant                  
17 - Supplemental restraint system Every 10 years

REMARKS :

#1 - When the Vehicle is used under severse driving conditions such as those mentioned below **, the engine oil should be changed more often

#2 - When the vehicle is used in extremely cold or hot weather areas, contamination of the filter may occur and filter replacement should be performed more often.

#3 - When the Vehicle is frequently operated under severse conditions, replacement should be preformed every 48,000 km (30,000 miles)

#4 - When the Vehicle is used under severse driving conditions, replacement should be performed every 24,000 km, (15000 miles)

#5 - When the vehicle is used in high humidity areas or in mountainous areas change the brake fluid every 24000 km  (15000 miles) or 15 months whichever occurs first.

#6 - When the Vehicle is used under severse driving conditions such as those mentioned below **, inspection should be performed every 12000 km ( 7500 miles) or 7.5 months whichever occurs first.

#7 - This inspection is not required to maintain emission warranty eligibility and it does not affect the manufactures obligations under EPS's in-use compliance program

** Examples of severe driving conditions
- Repeated short distance driving (item 33, 12 and 13 only)
- Driving on rough and or muddy roads (ittem 12, 13 & 15 only)
- driving in dusty conditions
- driving in extremely cold weather (itemm 3 & 15 only)
- driving in areas where road salts or otther corrosive materials are used ( item 6, 12, 13,14 & 15 )
- living in coastal areas (item 6, 12,13,, 14 & 15 )

Hosted by www.Geocities.ws

1