Instructions for RWtuneG2:

1. Run Install program. You already did this part. ;-)
2. Edit rwtuneg2.ini to match your server's info.
3. Run rwtuneg2.exe.

Ini settings:
1. [options] section:
   a. sounds: 1=yes, 0=no. Turn the sound effects on or off.
   b. hide_at_start: 1=yes, 0=no. Suppress the displaying of the program window
      at startup.
   *c. use_rwc: Set to launch RogerWilco using a .rwc file,
      ie. "use_rwc=C:\Program Files\RogerWilco\hi_pri.rwc".
   *d. last_ini: Set to have RWtuneG2 autoload a different ini file. This setting
      will be overwritten by the program whenever you open another ini file.
      Leave it blank to avoid this behavior.

   *These settings will only work in the default ini file, RWtuneG2.ini.

2. [host] section:
   a. address: address of your rwbs.
   b. password: password for rwbs. Leave blank if there is not a password.

3. [channels] section:
   a. count: Total number of custom channels. 
             (I don't recommend more than nine for obvious reasons.)
   b. default: Number of channel to connect to at startup. Set to -1 if you don't
               want to connect to any channel on startup.

   c. Change the text on the right side of the channel[n] entries to customize
      your channel names, ie.:

      channel1=Spaceballs
      channel2=Druidia
      channel3=Yogurt

      NOTE: channel0 is special, it is always the default "/" channel. You cannot
            change this.

4. [keys] section: 
   a. use keycode.txt to set appropriate values for individual channel keys.
   b. require_ctrl: 1=yes, 0=no.
   c. require_alt: 1=yes, 0=no.

   NOTE: You can only define keys for channel0 - channel9 regardless of how many
         custom channels you have defined. (I might be able to remove this
         restriction at a later date if I start feeling ambitious.)

Default Controls:

There are 18 key commands to which RWtuneG2 defaults:

Alt+Cntl+NumPad+: Switches up one channel.
Alt+Cntl+NumPad-: Switches down one channel.
Alt+Cntl+NumPad1: Switches to first channel.
Alt+Cntl+NumPad2: Switches to second channel.
Alt+Cntl+NumPad3: Switches to third channel.
Alt+Cntl+NumPad4: Switches to fourth channel.
.... etc, etc, etc .....
Alt+Cntl+NumPad9: Switches to ninth channel.
Alt+Cntl+NumPad0: Switches to the default "/" channel.
                  (This channel's name cannot be customized.)
Alt+Cntl+NumPad/: Disconnects from basestation.
Alt+Cntl+NumPad*: Pops up the tray menu.
Alt+Cntl+-      : Decreases Volume.
Alt+Cntl+=      : Increases volume.
Alt+Cntl+[      : Decreases mic gain.
Alt+Cntl+]      : Increases mic gain.

That's it. If you have any problems let me know.
Any and all comments are also welcome. (Don't send me emails asking for key
mappings though, I'd probably ignore you. Serious requests for help only
please.)

Hexdump
email:hexdump@insight.rr.com
