When we receive your blades they will be checked for problems such as chipped teeth, worn or missing parts.
Your blades will then be disassembled and cleaned of all rust and debris.
Your blades are then sharpened using state of the art sharpening equipment and cleaned again.
If we find worn or missing parts they will be replaced, cost of the parts are extra.
Next, your blades will be oiled, re-assembled, adjusted to the proper tolerance and tested.
It is important that we know what brand of clipper you use so we can test your blades properly.
How to Keep Your Blades in Good Condition
1. Clipping a very dirty animal can wear out your blades very quickly, it may also cause your clipper to run hotter. Try to remove heavy dirt from animals before you start.
2. Keep your blades free from a heavy build-up of hair by brushing with a tooth brush while clipping.
3. Use a lubricant as you clip.
4. Before you put your blades away for the day, brush them free of all hair and add a few drops of oil.
5. Don't allow your blades to become rusty.