TAFE 35 DI

CLUTCH
dry,frictional, dual type with two indepedent plates for driving tractor wheels and PTO shaft.
The tractor driving plate is12"
The PTO shaft driving plate is 10"

Gearbox
mechanical gearbox with sliding gears and two constant mesh gears of the imput side, and a planetary reduction gear unit at the gearbox ouput side, so that eight forward and two reverse gears are available.
The arrangement allows indepedent drive out of the PTO shaft

Power Take off (PTO)
Type Live 540rpm
Shaft Diameter 1.38" (35mm)

Brakes
Mechanical, with internal expanding brake shoes, acting on the rear wheels simultaneously or independently. the same braking system is used to apply the parking brake.

Steering
Recirulating ball worm gear or optional Hydrostatic steering

Hydraulic System
Hydraulic, 4cyl positio, pump driven through countershaft of gearbox. Oil supplied form central housing to ram cylinder. Top link sensing. draft and position control. 3 point linage with Cat 1 interchangeable balls ends.

Performance
Manufactuer's rated horsepower @ 2200 rpm PTO Hp 32 Engine Hp36

ENGINE
make                  simpson&Co.
model                  S3 2.4
Type                    4 stroke direct injiction diesel
No. of Cylinders    3
Displacement        144cu in
Bore                     3.5"
Stroke                   5"
Air Cleaner            Dry Type
Cooling                  Pressurized Water Cooling
Starting Aid           Intake Manifold Heater
Fuel Injiction Pump MICO inline (BOSCH)


Electrical
battery       12volt
Altemator 28amps
Ignition  1 key with neutral safety switch, 2 head lights, 2 tail lights 1 working light and flasing Saftey lights       

Wheels and Tires
front    6.00 by 16
rear      12.4 by 28 R1

Wheel Track  
front    48"-72"
rear     52"-72"
(Adjusment Steps 4" )

Weights and dimensions
length  123.5"
            119.5"
Width  65"
Wheel base 74.5"
                   72"
Gr. Clearance
Under Axel    21"
Central          12.8"
Tractor Weight  3561lbs

Capacities
Fuel tank   12.7 gal
Crankcase    7qts
Cooling system   11.1 qts
hydraulic              7.4 Gal

Standard Features
ROPS and seat belt, horizontal exhaust, tool box spring suspensions seat, chain stabilizers, drawbar, tachometer/houmeter, amp, gauge, oil pressure gauge, coolant temperature gauge and fuel gauge.

Optional Equipment
Vertical exhaust, block heater, front bumper-canopy for ROPS, turf tires, Cat. It interchangeable ball ends, front and weight platform and front weights.