MyLock 134D

                 The MyLock 134D gives you 2 needle, 3 or 4 thread overlock serging at an economy price. It's equipped with  a differential feed, which uses two sets of feed dogs to  prevent fabrics from puckering or stretching, or to create special effects.

                 The ratio of differential feed can be set anywhere from 0.7 to 2.0. And both stitch length and differential feed     dials can be set at any time, even while sewing.

                 The MyLock 134D has a built-in sewing lamp, an easy-to-follow threading chart, and optional Janome serging feet snap on for quick changes.

                 Part Number: MYLOCK-134D

                 Standard Accessories:

                      Standard Serger Foot

                 MyLock 203

                 The MyLock 203 is a classic 1 needle, 3 thread overlock serger. Simple threading instructions make it a breeze to   use. And with its rolled hem capability, it's the perfect  machine for basic serging projects.

                 The MyLock 203 also works with many optional Janome snap-on serger feet to create effects such as cording,   piping, beading and blind hem stitching.

                 Part Number: MYLOCK-203

                 Standard Accessories:

                      Standard Serger Foot
                      Thread Stripping Discs
                      Needle Plate (standard)
                      Rolled Hemming Needle Plate
                      Needle Plate (wide seam)
                      Needle Plate (standard)
                      Spool Nets (3)
                      Spool Caps (3)
                      Spool Holders (3)
                      Set of Needles
                      Screwdriver (L)
                      Tweezers
                      Lint Brush
                      Oil
                      Upper Knife
                      Spanner
                      Needle Threader
                      Looper Threader
                      Waste Chip Box

                 MyLock 234D

                 The MyLock 234D is a solidly-built, serging workhorse.With 2 needles and 3 or 4 thread overlock stitching, plus
                 rolled hem stitching, it has everything you need for professional results.

                 Two feed dogs push or pull your work through the machine at exactly the right speed, so you don't get puckering or stretching along your seam.

                 The ratio of differential feed can be set anywhere from 0.7  to 2.0. And both stitch length and differential feed dials can be set at any time, even while sewing.

                 The MyLock 234D has a built-in sewing lamp, an easy-to-follow threading chart, and can use our wide array of optional snap-on serging feet.

                 Part Number: MYLOCK-234D

                 Standard Accessories:

                      Standard Serger Foot
                      Thread Stripping Discs
                      Needle Plate (standard)
                      Rolled Hemming Needle Plate
                      Spool Nets (4)
                      Spool Covers (4)
                      Upper Knife
                      Screwdriver (L, S)
                      Spool Holders (4)
                      Tweezers
                      Oil
                      Lint Brush
                      Set of Needles
                      Spanner
                      Needle Threader
                      Looper Threader
                      Waste Chip Box

                MyLock 634D

                 The MyLock 634D with electronic control is the most advanced MyLock serger. It has 2 needles and 2, 3 or 4      thread overlock stitching. The differential feed ratio, which is adjustable from .05 to 2.25, provides increased control for handling all types of fabrics and for creating desired special effects.

                 Threading is a breeze due to color-coded thread guides and a self-threading lower looper. Simply lay the thread   into the guide, flip a switch, and the lower looper is  threaded. The guide is automatically returned to its normal position when you  turn the balance wheel. And when you lift the presser foot for rethreading, the thread tensions are automatically released so you can draw the thread smoothly.

                 The MyLock 634D also lets you quickly switch to rolled hemming without  changing the needle plate. A lower looper pre-tension stitch eliminates the need to change tension for rolled hems.

                 When you want to make the most of your serging time, with professional results, the MyLock 634D is unmatched.

                 Part Number: MYLOCK-634D

                 Standard Accessories:

                      Standard Serger Foot
                      Thread Stripping Discs
                      Needle Plate (standard)
                      Spool Nets (4)
                      Spool Caps (4)
                      Spool Holders (4)
                      Upper Knife (1)
                      Spreader
                      Screwdriver (L, S)
                      Tweezers
                      Lint Brush
                      Spanner
                      Oil
                      Needle Threader
                      Set of Needles
                      Waste Chip Box

                 It's the first serger easy enough to be a Memory Craft. In fact it's, easier, faster, and more professional than ever!

               The Only Serger With Touch Screen Control

                 The Janome Memory Craft Compulock is the only serger with a large, interactive Visual Touch  Screen which displays timely information and – in  turn – registers your input and selections. Choose a stitch with a single touch! From the moment the  Compulock is turned on, you're guided through each step – in your choice of  several languages. You can page through a menu of built-in stitches, consider recommended settings, change settings, and receive messages – using many of      the same screen navigation icons you've used on your Memory Craft sewing machine.

                 From overlock to flatlock to overedge to rolled hem to picot edge to safety stitch, the Compulock has it all. Fifteen primary stitches plus six variations – a total of 21 built-in stitches – more than any other serger on the market. And the Compulock cover stitch is 6mm wide, giving your homemade garments the look of expensive ready-to-wear.

               Nearly Triple The Working Room

                 When you look at the Compulock, you'll immediately notice that it doesn't look like a regular serger. Its design – like Memory Craft sewing machines – is clean and sleek. Plus, to the right of the needle there's nearly three times the work  space of a regular serger. That's enough room to work with both hands, even enough space for your entire garment to pass through while stitching the final cover stitch.

               With Automatic Settings You Spend Less Time Guessing  -- More Time Sewing

                 At the selection of your stitch, Auto Tension goes into action. The moment you choose a stitch, every tension is set  automatically and the Compulock is ready to serge immediately. No need to check an instruction manual to determine where to set each needle tension and each looper tension as you change from one stitch to another. At the same time, the Touch Screen recommends the best stitch length and differential feed ratio.

               Follow The Lights For Easy Threading

                 Even professional sewists will admit that threading a regular serger can be a headache. What makes the Compulock so easy to thread? Depending on which stitch is selected – whether 2, 3, 4 or 5 thread -- the appropriate color-coded Light Emitting Diodes illuminate to indicate the correct thread paths. And color-coded thread guides lead the user the rest of the way. Even if you're a beginner, you can thread your Compulock with confidence.

               Auto Thread Tension

                 The words "Looper Tension" can send even the most experienced serger users running for their machine               manuals. But the Compulock automatically gives you the recommended settings with each stitch you select. You can concentrate on serging, not experimenting with dials, knobs, and expensive fabric.

                 All your settings appear right on the screen, including the recommended adjustment for length, differential feed,
                 even type of thread.

                Customize And Memorize

                Because it's a Memory Craft, the Compulock can "customize and memorize." Different fabrics, layers, threads or techniques may require changes to programmed or recommended settings. No more fumbling with awkward reference wheels or trying to remember that thread tension that worked so perfectly on your last project. You may modify particular         settings on particular fabrics for particular effects. These modified settings can be put in "Memory" for instant recall. In fact, the Compulock can store up to 30 stitches with customized settings – in addition to the 21 built-in stitches – all ready for instant   recall. As a result you get your own customized stitch package.

                 Five Safety Sensors Immediately Signal Where To Look And What To Do

                 Five sensors monitor your machine settings to remind you of any oversights which might ordinarily lead to problems. A "beep" initiated by any one of these sensors will be followed by a message on the Visual Touch Screen. And, the
                 Compulock won't run until you take the indicated action. These sensors indicate when a door or looper cover is ajar, when the knife or the upper looper is in the wrong position, when the presser foot is up or when the wrong needle plate is in place. This unique Safety System is sure to minimize the anxiety levels of many users.

                 Visit your authorized participating Janome dealer for a complete demonstration.

                 Part Number: COMPULOCK

                 Standard Accessories:

                      Spool Nets (5)
                      Spool Caps (5) Spool Holders (5)
                      Set of Needles
                      Upper Knife (1)
                      Spreader
                      Large and Small Screwdrivers
                      Tweezers
                      Lint Brush
                      Spanner/Wrench
                      Oil
                      Needle Threader
                      Needle Plate B for Cover Stitch
                      Presser Foot B for Cover Stitch
                      Extension Table B
                      Needle Plate A
                      Presser Foot A
                      Extension A
                      Waste Chip Box
                      Soft Case