/* ** @progname book-latex ** @author Nicklaus ** @version 3 ** @category ** @output LaTeX ** @description ** ** $Id: book-latex.ll,v 1.5 2000/11/28 21:39:45 nozell Exp $ ** ** SourceForge Versions: ** ** $Log: book-latex.ll,v $ ** Revision 1.5 2000/11/28 21:39:45 nozell ** Add keyword tags to all reports ** Extend the report script menu to display script output format ** ** Revision 1.4 2000/11/11 07:52:06 pere ** Use ISO 8859/1 charset in LaTeX. Add meta-information in header. ** ** Revision 1.3 2000/11/11 07:46:47 pere ** Include index even when there is no bibliography. ** ** Revision 1.2 2000/11/11 04:07:37 dabright ** ** reports/book-latex.ll: Added processing for BAPM tag, corrected ** error in referencing "spouse" rather than "s" in longvitals, ** added processing for the TYPE tag (modifier for EVENT), corrected ** setDayNumber so that it only uses text phrases (e.g., "on the same ** day") when both previous date and current date are fully ** specified, preserve line breaks represented by blank CONT/CONC ** tags, ensure "cn" variable in sourceIt is initialized before ** referenced, and miscellaneous typographical corrections. ** ** ** Revision 1.1 2000/11/10 dabright ** Initial revision - copy of Version 2.5 from Dennis Nicklaus ** ** Pre-SourceForge history: ** ## Dennis Nicklaus (dnicklaus at yahoo.com) ** Version 2.5 Feb. 2000 ** ** Requires LifeLines version 2.3.3 or later ** Requires tree.tex (for formatting) (tex macros for tree drawing). ** (found in TUGboat, vol. 6 (1985) and online in various places, ** including with the desc-tex lifelines report) ** ** based on work by David Olsen (dko@cs.wisc.edu) which in turn was ** based on work originally done by Tom Wetmore (ttw@cbnews1.att.com). ** also work by Kurt Baudendistel (baud@research.att.com). ** A few others, such as Ed Sternin (edik@brocku.ca) made other suggestions. ** and corrections. ** ** This report prints, in register/book format, information about all ** descendants of a person (or persons) and all of their spouses. ** It tries to understand as many different ** GEDCOM tags as possible. All source information (SOUR lines) is in the ** bibliography and footnotes. ** ** An alternate usage (new in version 2) lets you print out sort of a combination ** ahnentafel and register report going through the ancestors of the ** persons chosen. ** ** The output is in LaTeX format. Therefore, the name of the output file ** should end in ".tex". To print (assuming the name of the output file is ** "out.tex"): ** latex out ** (repeat latex-ing to get cross-references resolved) ** dvips out ** lpr out.ps ** ** Indexing commands are placed within the LaTeX output. To include an index ** in the document do the following: ** latex out ** makeindex out ** latex out ** latex out ** dvips out ** lpr out.ps ** ** I admit that this is lot of post-processing, but the results are worth it. ** ** LaTeX interprets $, &, %, #, _, {, }, ~, ^, and \ as special characters. ** If you have any of these characters in your database, you will need to ** convert them to \$, \&, \%, \#, \_, \{, \}, \verb|~|, \verb|^|, and ** $\backslash$ (or \verb|\|) respectively after the report is generated and ** before running through LaTeX. $, &, _, ~, and ^ are easy to find, since ** they are not used in the report. % and # are only used near the beginning. ** {, }, and \ will be more difficult to find since they are used as part of ** the LaTeX commands throughout the report. ** A special note about indexing. If you have names with double quotes in ** them, e.g. Forrest "Foggy" Morrison, not the nice Latex quotes style: ** Forrest ``Foggy'' Morrison, then the " marks will screw up the index. If you'ld like to credit me & this program in your introduction if it's something you're really going to publish that'd be nice (but not required). Something like this could be used: "This document was prepared using LifeLines v." version() " genealogical database program\n" "by Thomas T.~Wetmore~IV, {\\tt ttw@beltway.att.com}. The script {\\tt book-latex}\n" "by Dennis Nicklaus {\\tt dnicklaus at yahoo.com} was used to generate the \\LaTeX\\ code.\n" */ /* WHAT DENNIS NICKLAUS DID: I expanded this program greatly, mostly based on a "book" report done by Kurt Baudendistel (baud@research.att.com). I combined what I liked best about register-tex and the book report. numbering: Register-tex had modified register numbering, where book had no numbering, and just always referred to people by page number, so I took the mod. reg. numbering. sources/bibliography: book had really nice SOUR support, so I took that and modified it a little bit, so that it supports a more std. gedcom usage of the SOUR definitions (according to my reading of the std). nothing needed in database: book required that you have various things like CHAP and PART additions to your lifelines gedcom database in order to find who to include in the book. I didn't include that multiple-person selection: On the other hand, maybe you want to include the descendents of more than one person. I included the ability (which was sort of there in book) of specifying multiple people. For Instance, you might specify your maternal grandfather and your paternal grandfather to get all your first cousins on both sides into the same book. This report asks you to keep selecting as many people as you want. It does the complete descendency for each person selected. Each person so selected starts a new chapter in the book. I make up a title of the book based on the surnames of indi's chosen. When you don't want to select any more people, just hit return at the "select indi" prompt. english sentences: The book report was very good at automatically making real sentences instead of just fragments. I used that. I try to make compound sentences using "and" whenever possible, and this makes for a lot of rules in the code to try to handle a lot of cases. I probably missed a few where the english will still come out poorly. placename smarts: Also from book is the ability to recognize a place which is used multiple times. For instance, the first time it sees Keswick,Keokuk Co.,Iowa, it'll print the whole thing. But then every subsequent time, it'll just print Keswick. Makes things VERY readable, but it can leave some ambiguous things, like if you have two Keswick's, it might be hard to figure out which is meant. Likewise, I picked up ADDR support from book. if you have: 2 PLAC thattown 3 ADDR thisplace It'll say "at thisplace in thattown". Simply having 2 PLAC results in "in thattown". One thing I did change from book was making sure it always says "in thattown" after saying "at thisplace". Book was happy just saying "at thisplace" and assuming you know what it meant. But if you have several of 2 PLAC Town,County,State 3 ADDR his home Then just saying "at his home" doesn't do much, so I made sure it always says at least "at his home in Town". (the first time, it'd say, "at his home in Town,County, State".) (also useful if you have lots of different St. Mary's, e.g.) I also made it watch for words like "near, north,..." for the "town" part of the place, so that it doesn't say something icky like "in near Mytown". many events: register-tex supported a lot more GEDCOM fields, so I tried to include all of thim. But I personally don't use all of them, so some may look ugly. charts: I added a feature that makes it draw 3 gen desc. tree charts for any indi who heads up a chapter. I took code from desc-tex to do this. (and modified it slightly because it didn't work for some cases). So you need the tree.tex macros, which this will try to include. Note: I modified the tree.tex macro a little bit to scrunch things up because I have some ancestors with huge families, and all their 10 kids had big families, so I had to scrunch the spacing to fit 3 gen. onto one page. I dropped most of the pedigree chart capabilities in book, but I did add one thing to look for the something like: 1 NOTE BOOKPEDIGREE on each indi. If a note like that is found for an indi, that indi's pedigree (8 gen, I think) will be printed as a latex figure in the book. I find this useful, for instance, when I do a book of all the desc. of all the grandparents of my grandmother. I have a BOOKPEDIGREE note on my grandmother so you can see how all these lines fit together. If you have 1 NOTE BOOKDESCENDENT on an individual, it'll draw a 3-gen desc. chart for that person. excursions: These are for when you are following one family down, say SMITH, and one of the SMITHs marries a JONES. If you want to include the JONES ancestry in this book, but don't really want to follow every JONES descendent, then if you put a note on the JONES person: 1 NOTE BOOKEXCURSION That causes this report to wait until the end of the chapter, then make a subsection which goes to the farthest male JONES ancestor, and document the direct line between that JONES ancestor and the JONES who married the SMITH. It doesn't follow every JONES line down, but includes info about each child of each direct JONES ancestor. intro I include the possibility that you might want to put your own introduction before most of the book. You can input your own intro file if you want. It should contain all the Latex directives you want also, such as \chapter{Introduction}. grandchild divisions Starting with the 4th generation down from each chapter head, I group together sets of grandchildren with over and under braces. (It doesn't make any sense to do it for generations 1-3 because they'd all be in the same group.) The idea is that if patriarch has kids A,B,C... Then by generation 4, you'll get a grouping of A's grandkids followed by B's grandkids, followed by C's grandkids. Lots of intermarrying might occasionally confuse the code which does this. Chapter splits If you put a 1 NOTE BOOKCHAPSPLIT on the person who is a chapter head, then each of his children will head up their own chapters with the children of that head as Generation 1 in their respective chapters. You should be careful not to have a BOOKCHAPSPLIT on anyone who is not the head of a line, or it'll probably come out ugly. Okay, now that you know how to produce a report, here are the formatting conventions you must follow to get a good one. All records shown here are optional, and all other records are okay -- they'll just be ignored by the book report: 1 NAME - Multiple name records allowed. First is ``true name.'' - Later ones, with given but no surname, are ``nicknames'' or familiars. - Later ones, with surname but no given, are aliases or alternate spellings. - Later ones, with both surname and given, are aliases. - Post-titles, such as MD, should be included in this name. 2 SOUR ... - Source for name. 1 TITL ... - Pre-titles, such as Reverend. (but I don't call people by their titl much. I mean after all, a person isn't Captain John yet when they are born. So I currently ignore this.) 1 SEX ... 1 SOUR ... - Source for parentage if no BIRT or CHR is given. This produces better output than BIRT-SOUR records with no DATE or PLAC given. I also use this when I have a general source which tells me everything about the person and I don't want to mess things up by citing it separately 8 times for birth, death, marr,... 1 evnt ... - BIRT, CHR, DEAT, BURI, MARR, DIV, DIVF, or ANUL,... 2 DATE ... - Date should be of format [ABT|BEF|AFT|BET] [day] [JAN|...|DEC] [year] [-year for BET] 2 PLAC ... - Comma separated list of localities appropriate for the expresstion ``in ...''. 3 ADDR ... - Location appropriate for the expression ``at ... in ...''. 3 CEME ... - Location appropriate for the expression ``at ... in ...''. 2 AGE ... - Age appropriate for the expression ``at age ...''. 2 CAUS ... - Cause of death appropriate for the expression ``died of ...''. 2 SOUR ... - Source for event. 2 NOTE ... - Text to be inserted in book following technical details of the event. (I use this instead of TEXT) 3 SOUR ... - Source for text. 1 TEXT ... - Text to be inserted in book about the person. I toyed with putting this before the death info, but decided I like having all the vital stuff first, then the more interesting text stuff. 2 SOUR ... - Source for text. 1 NCHI ... - Number of children (family records only). n CONT ... - Appropriate for TEXT and SOUR. You have the option of selecting either 1 TEXT, 1 NOTE or (not and) only those 1 NOTE records which start with an ! (exclamation) to include as the main body of text for each individual. From the GEDCOM std, TEXT "contains information from the source document." One might argue that I'm misusing it here. But it depends on what kinds of things you use 1 TEXT for. It might be nicely readable and technically appropriate if, for example, you copy a bio. of someone from an old book and want it included in your printout. Also, in sort of a self-referential way, you're including text from the book you publish with this. :-) I personally don't print out the "1 NOTE" records because I personally (and feel it is common that most people) have a lot of garbage in their notes, either general reminders to themselves, or PAF-style source notes (e.g. 1 NOTE BIRTH-DEATH: whatever source) However, with version 2.2, I give the option to print out either all 1 TEXT, all 1 NOTE, or all 1 NOTE !-tagged notes. (where if the 1st char of the note is !, then the 1 NOTE gets included). Something that I consider a typical 2 NOTE usage might be: 1 BURI 2 DATE when 2 PLAC somewhere 2 NOTE (with her parents) But you do have to be a little aware of what this report is going to generate if you want to make it a grammatically correct sentence SOURCE records are complicated, but they produce great output. To document a fact with a simple footnote, use n SOUR ... +1 CONT ... This can get more complicated (all records optional): (actually, I'm not sure what all is supported for footnotes any more, I mostly use bibliography entries.) n SOUR ... +1 CONT ... +1 PAGE ... +1 VOLU ... +1 NOTE ... +2 CONT ... +1 SOUR @id@ The +1 SOUR @id@ produces a citation to an entry in the bibliography, not a footnote, that is attached to the text of the footnote. To get a citation in the text itself, use n SOUR +1 SOUR @id@ or the more simple n SOUR @id@ To create a bibliographic entry that can be referenced as a citation, include a cross-reference definition. This can be included at the point where a citation is wanted. However, since you will like re-use the same citation many times and you'll want to be consist, define the cross-reference definition separately. A cross-reference definition takes this form (start at level 0) n @id@ SOUR - no text allowed here +1 AUTH ... - author of source +1 TITL ... - title of article or book +1 PUBL - publishing info record note that all these +2 things have to be under it for a bib. entry. (rules are diff. for footnotes). This is the way I read the 5.3 GEDCOM std. +2 NAME ... - name of publication,e.g. journal +2 PUBR ... - publisher name +2 ADDR ... - address +2 PHON ... - phone number +2 DATE ... - date of pub. +2 VOLU ... - volume or list or range +2 NUM ... - number or list or range +1 FILM ... - LDS film number +1 FICH ... - LDS fiche number +1 PAGE ... - page or list or range +1 REPO ... - library name +1 NOTE ... - free form text +2 CONT ... +1 SOUR @id@ - cite another source from bibligraphic entry +1 TEXT ... - free form text to print +2 CONT ... Note that the id can be most text that begins with an alphanumeric character -- check your gedcom spec! Using a descriptive name of the source that it represents, such as kurts-death-record or 0996198 (for film numbers) is a good idea. (but Lifelines eats the nice names when it reads them in) SEMI-BROKEN STUFF A few problems you might notice: I'm not really happy with the desc. trees in several other cases, such as multiple spouses, and had to fix desctex a little bit to make it work better. It still isn't perfect, I don't think. The sentence structure may come out badly in some odd cases I haven't encountered/tested yet. It's been a real pain to get it as far as it is, and I'm still not happy with it. (It gets complicated because I try to make compound sentences and use pronouns so it isn't so choppy.) The "test for common grandparents" thing was just the simplest way of doing it I could think of. Not perfect, but works 99%. I really want to put some smarts in so placename ambiguity is less of a problem. For instance to distinguish the town of Washington, Iowa from the state of Washington. My LaTex is sort of rusty, and some things aren't really properly done, possibly. (Like the spacing on the overbraces designed to fill one column.) Also, it's line-filling is pretty weird sometimes, such as just putting one or two words in the first line of a person's description. I don't understand why it does that. FOR VERSION 2: I also now support a book which goes through an individual's ancestors in ascending order. Numbering is ahnentafel style. A new chapter for each generation. FOR VERSION 2.2 (Several of these were suggested by Ed Sternin (edik@brocku.ca) a. Fixed problem where in the descendent trees if a spouse's last name isn't known. It now puts in escaped underscores. (Also fixed printfirstname to print underscores when no given name is known.) b. Added the BOOKCHAPSPLIT option If you put a 1 NOTE BOOKCHAPSPLIT on the person who is a chapter head, then each of his children will head up their own chapters with the children of that head as Generation 1 in their respective chapters. I added this because I have a family where the father had 3 sons. I want to include the info on the father, but I also want each of the three sons to have their own chapter. So I put a BOOKCHAPSPLIT note on the father, and it all comes out automatically. You should be careful not to have a BOOKCHAPSPLIT on anyone who is not the head of a line, or it'll probably come out ugly. (It causes subsequenty members of the generation of the noted person to have separate chapters, as well as the children of the noted person.) c. I give the option to print out either all 1 TEXT, all 1 NOTE, or all 1 NOTE !-tagged notes (where if the 1st char of the note is !, then the 1 NOTE gets included). d. Fixed mistake with running headers in ancestor format books so the running header is now " Ancestors", not "Descendents". e. Added option (query turned off by default to match old way since it is confusing to a beginner) to reset the placenametable at each generation. If this option is selected, then the effect is that any placename will have the fully specified (long) name printed out once in each generation. I find this useful sometimes, just to remind people where you're talking about since it might have been a long time since the place was introduced. f. if there is a 1 Event, 2 DATE or 2 PLAC record where there is no value on the 2 DATE or 2 PLAC (but the record is present), it'll no fill in an underscore where the date/place would be, e.g., Joe was born in ____ in ____ . Previously if the 2 DATE or 2 PLAC were present and empty, it would have said "born in in ." which isn't so nice. g. Changed from supporting 3 SITE records to 3 ADDR records because SITE isn't supposed to be part of std. GEDCOM anymore, ADDR is. I hope this is as easy of a global replace for you as it was for me. (of a gedcom file in a text editor). h. Fixed A back-reference number (explaining that children were shown earlier) in ancestor mode. i. Fixed problem in ancestor mode that would print out the long text for some individuals more than once. New For Version 2.3 Not much is new: Don't do excursions in ancestor mode Added a couple LaTex macros that I use for pictures. New For Version 2.4 Some contributions by Dave Steiner (steiner@bakerst.rutgers.edu) Some very minor typesetting fixups to make some spacing more consistent. Some spaces added in certain parts, spaces taken out of other places. Says a couple "have no children" instead of "had no children" if it looks like the couple are still married and living. The bibliography filename will now be -bib.tex instead of -bib.tex. Supports CONC as well as CONT continuation lines in most places. I've made a couple other similarly minor cosmetic changes, one of which forces a new paragraph during excursions in an oddball case. Made a change in ancestor mode so that if cousins marry, it won't print the information about the common ancestors twice. Also an ancestor mode change so that ref. numbers for a person's parents appear in the text in the longvitals() description. New For Version 2.5. Fixed a mistake in check_print_divinfo which made it not work at all. New For Version 3.0 Several miscellaneous fixes. Now part of lifelines sourceforge distribution. See sourceforge history. Uses documentclass instead of documentstyle Added ability to print a limited number of generations in descendent-style books. At the terminal generation, if a person is not dead, it will only print the birth year, not full date. Fixed the titlepage generation. Some fixes to support latest version of lifelines (or maybe its just differences for lifelines under solaris): Intersect() can't be used inside an if() call. It has to call intersect separately and use the result in a set() The childnum argument of children() is now only valid within the scope of the children() loop. */ /* Stuff I haven't implemented: adler@math.toronto.edu (Jeffrey D. Adler) suggested inserting the following latex code in this report so you don't have to worry about special chars such as $, etc.: Just before the "\\begin{document}\n\n" line, I inserted the following: "%Make lots of special characters ordinary,\n" "% since they are likely to appear in the text.\n" "\\catcode`\\%=12\n" "\\catcode`\\$=12\n" "\\catcode`\\^=12\n" "\\catcode`\\_=12\n" "\\catcode`\\~=12\n" "\\catcode`\\&=12\n" "\\catcode`\\#=12\n\n" I (DJN) think there might be some problems, esp. with the % sign since it is used around footnotes by this program (easily fixed) I also purposely don't use it since I do use the some of the Latex symbols for their Latex meanings. Another suggestion came from "Denis B. Roegel" regarding the over/under braces. He suggested using something like: \begin{minipage}{\columnwidth} $\overbrace{\hspace*{3in}}$ \vspace{3ex} \begin{center}{\large\bf 24\ Henry REGLE}\end{center} \end{minipage} \nobreak Henry {\sc REGLE}\index{REGLE, Henry|bfit}, ... and For \underbrace, try to put a \nobreak before: \nobreak $\underbrace{\hspace*{3in}}$ I haven't tried these ideas out to see if I like it better. But I did include some of the \nobreaks before the underbrace and after the big center-ed person's name. */ global (maxgenprint) /* number of generations to print full info for.*/ global (atmax_generation) /* used so we don't print full birthdates of living individuals at the MAX-th generation */ global (ancestormode) global (notes_text_mode) global (eventPlaceTable) global (atAddrValue) global (eventNameTable) global (in) global (out) global (idex) global (stab) global (powValue) global (namereturn) global (excurlist) global (sourceList) global (bibList) global (bibTable) global (figureCiteList) global (figureNodeList) global (gotValue) global (gottenNode) global (gottenValue) global (dayNumber) global (previousDayNumber) global (daysToMonthList) global (not_married_flag) global (dumpplacetable_each_gen) global (hadsplitnote) global (force_desc_chart) global (global_dead) /* used at the MAX-th generation so we know if indi is dead*/ proc main () { list (headlist) table(stab) /* Table of numbers for each individual */ list (bibList) list (excurlist) table (bibTable) list (figureCiteList) list (figureNodeList) list (sourceList) list (daysToMonthList) setel (daysToMonthList, 0, 0) setel (daysToMonthList, 1, 0) setel (daysToMonthList, 2, 31) setel (daysToMonthList, 3, 59) setel (daysToMonthList, 4, 90) setel (daysToMonthList, 5, 120) setel (daysToMonthList, 6, 151) setel (daysToMonthList, 7, 181) setel (daysToMonthList, 8, 212) setel (daysToMonthList, 9, 243) setel (daysToMonthList, 10, 273) setel (daysToMonthList, 11, 304) setel (daysToMonthList, 12, 334) set(force_desc_chart,0) if (1) { getintmsg (ancestormode, "Enter 0 for descendent, 1 for ancestor chart") } else { set (ancestormode, 0) } if (1) { getintmsg (notes_text_mode, "Book Text:1='1 TEXT'; 2= all '1 NOTE'; 3= !-tag '1 NOTE's") } else { set (notes_text_mode,1) } if (0) { /* change this to "if (1)" to turn this query on. */ getintmsg (dumpplacetable_each_gen, "Enter 1 to reset place name table each generation, 0 to not") } else { set(dumpplacetable_each_gen,1) } set (maxgenprint,999) if (eq(0,ancestormode)){ if (1) { getintmsg (maxgenprint, "Max generations for descendency books") } else { set (maxgenprint,999) } } getindi(indi) /* Get the individual to start with */ set(familycount,0) while (indi){ set(familycount,add(familycount,1)) enqueue(headlist, indi) set(indi,0) getindi(indi) /* Get next */ } /* Print preamble. Feel free to change this to suit your tastes. */ "\\documentclass[twocolumn,twoside,titlepage]{book}\n" /* LaTeX 2e */ /*"\\documentstyle[twocolumn,makeidx]{book}\n"*/ "\\pagestyle{myheadings}\n\n" "% Enable ISO 8859/1 charset" nl() "\\usepackage{isolatin1}" nl() "% Shrink the margins to use more of the page.\n" "% This is taken from fullpage.sty, which is on some systems.\n" "\\topmargin 0pt\n" "\\advance \\topmargin by -\\headheight\n" "\\advance \\topmargin by -\\headsep\n" "\\textheight 8.9in\n" "\\oddsidemargin 0pt\n" "\\evensidemargin \\oddsidemargin\n" "\\textwidth 6.5in\n\n" "\\newcounter{childnumber}\n\n" "% The \\noname command is needed because TeX doesnt like underscores.\n" "\\newcommand{\\noname}{\\underline{\\ \\ \\ \\ \\ }}\n\n" "\\newcommand{\\nodate}{\\underline{\\ \\ \\ \\ }}\n\n" "% Environment for printing the list of children.\n" "\\newenvironment{childrenlist}" "{\\begin{small}\\begin{list}{\\sc\\roman{childnumber}.}" "{\\usecounter{childnumber}\\setlength{\\leftmargin}{0.5in}" "\\setlength{\\labelsep}{0.07in}\\setlength{\\labelwidth}{0.43in}}}" "{\\end{list}\\end{small}}\n\n" "% The following commands are used to create the index.\n" "\\newcommand{\\bold}[1]{{\\bf #1}}\n" "\\newcommand{\\bfit}[1]{{\\bf\\it #1}}\n" "%%\\newcommand{\\see}[2]{{\\it see #1}} %not needed with makeidx.sty\n\n" "% Command to use at the beginning of each new generation.\n" if (ancestormode){ "\\newcommand{\\generation}[2]" "{\\newpage\\begin{center}{\\huge\\bf Generation #1}\\end{center}" "\\vspace{3ex}\\setcounter{footnote}{0}" "\\markright{#2 Ancestors" "\\hfill Generation #1\\hfill\\ }" "}\n\n" } else{ "\\newcommand{\\generation}[2]" "{\\newpage\\begin{center}{\\huge\\bf Generation #1}\\end{center}" "\\vspace{3ex}\\setcounter{footnote}{0}" "\\markright{#2 Descendants" "\\hfill Generation #1\\hfill\\ }" "}\n\n" } "\\newcommand{\\image}[4]" "{\\begin{figure}\n\\centerline{\\psfig{figure=#1,height=#4}}\n" "\\label{#3}\n" "\\caption{#2}\n\\end{figure}}\n" "\\newcommand{\\imwide}[4]" "{\\begin{figure*}\n\\centerline{\\psfig{figure=#1,height=#4}}\n" "\\label{#3}\n" "\\caption{#2}\n\\end{figure*}}\n" "\\makeindex\n\n" "\n\\input{tree}\n" /* needed for making descendent trees */ "\\begin{document}\n\n" /*******************************************/ /* Make the title */ /*******************************************/ "\\title{ The " forlist(headlist,head,localcount){ if (gt(localcount,1)){ if (gt(familycount,2)){ /* don't say "a, and b." */ ", " } if (eq(localcount,familycount)){ " and "} } surname(head) } if (eq(1,familycount)){ " Family}\n"} else {" Families}\n"} getstrmsg(author, "Enter the author(s) of this document:") "\\author{" author "}\n" "\\date{\\today}\n" "\\maketitle\n" "\\clearpage\n" "\\onecolumn\n" "\\pagestyle{empty}\n" "\\mbox{ }\n" "\\vfill\n" "\\begin{center}\n" "Copyright \\copyright \\ \\today \\ " author "\\\\" getstrmsg(copyplace, "Enter the place for the copyright notice:") copyplace "\n" "\\end{center}\n" "\\clearpage\n" "\\pagestyle{myheadings}\n" "\\twocolumn\n" "\\setcounter{page}{1}\n" "\\tableofcontents" getstrmsg(intro, "File that contains introduction (if any):") if (ne(strcmp(intro, ""), 0)) { "\\input{" intro "}\n" } table (eventNameTable) table (eventPlaceTable) table (eventNameTable) insert (eventNameTable, "BIRT", "was born") insert (eventNameTable, "ADOP", "was adopted") insert (eventNameTable, "BAPM", "was baptized") insert (eventNameTable, "CHR", "was baptized") insert (eventNameTable, "DEAT", "died") insert (eventNameTable, "BURI", "was buried") insert (eventNameTable, "GRAD", "")/* left blank since it is done as a separate case */ insert (eventNameTable, "NATU", "was naturalized") insert (eventNameTable, "CHRA", "was christened (as an adult)") insert (eventNameTable, "CENS", "was listed in the census") insert (eventNameTable, "ORDN", "was ordained") insert (eventNameTable, "RELI", "") insert (eventNameTable, "RESI", "lived") insert (eventNameTable, "CONL", "was confirmed") insert (eventNameTable, "CONF", "was confirmed") insert (eventNameTable, "BLES", "was blessed") insert (eventNameTable, "BASM", "was bat mitzvah-ed") insert (eventNameTable, "BARM", "was bar mitzvah-ed") /* these two Will related things come out kind of icky because I just always use plain pronouns like he, she, not possessive ones, so I have to say "he wrote a will" instead of "his will was dated" */ insert (eventNameTable, "PROB", "had a will probated") insert (eventNameTable, "WILL", "wrote a will") insert (eventNameTable, "RETI", "retired") indiset(idex) set(out, 1) set(in, 1) dayformat (2) monthformat (6) dateformat (1) while (indi, dequeue(headlist)) { if (ancestormode){ call ancestor_chapterproc(indi) } else { call chapterproc(indi) } } set(basename, save(substring(outfile(), 1, sub(index(outfile(), ".tex", 1), 1)))) /* Output bibliography commands */ if (not (empty (bibList))) { "\n\n\\onecolumn" "\n\\cleardoublepage" "\n\\label{Bibliography}" "\n\\addcontentsline{toc}{chapter}{Bibliography}" "\n\\begin{thebibliography}{9.99}" "\n\\input{" basename "-bib.tex}" "\n\\end{thebibliography}" } "\n\n\\cleardoublepage" "\n\\label{Index}" "\n\\addcontentsline{toc}{chapter}{Index}" "\n\\input{" basename ".ind}" "\n\n\\end{document}\n" /* Output bibliography file */ print ("\n\nCreating support files ...") if (not (empty (bibList))) { newfile (concat (basename, "-bib.tex"), 0) print ("writing to : ") print("\n") print(concat (basename, "-bib.tex")) print("\n") while (b, dequeue (bibList)) { b } } } proc chapterproc(topguy) { list(ilist) /* List of individuals */ list(glist) /* List of generation for each individual */ set(last_grandparents,0) indiset(grandparentset) indiset(hisset) indiset(last_grandparentset) set (chapterTitle, save (concat ("The ", concat (fullname (topguy, 0, 1, 99), "\ Family")))) "\n\\chapter{" chapterTitle "}" "\n" enqueue(ilist, topguy) enqueue(glist, 1) set(curgen, 0) set(printed_brace,0) set(just_printed_brace,0) /* we have to do this add1 once for the topguy of each chapter We used to start out with "in" initialized to 2, but that made the numberings bad when there were multiple chapters, so now we init to 1 and do this +1 here */ set (in, add (in, 1)) set (hadsplitnote,0) set (this_level_hadsplitnote,0) while (indi, dequeue(ilist)) { /* This is where we implement the "Chapter Split". The idea is, that if you put a BOOKCHAPSPLIT note on the head of a line, then each of his children will head up their own chapters with the children of that line as Generation 1 in their respective chapters. */ if (eq(1,this_level_hadsplitnote)){ call chapterproc(indi) } else{ set(thisgen, dequeue(glist)) if (ne(curgen, thisgen)) { /* If we are starting a new generation, close off brace from previous gen. if necessary */ if (printed_brace){ "\n\\nobreak" "\n" "$\\underbrace{\\hspace*{3in}}$" "\n\n" set(printed_brace,0) } if (dumpplacetable_each_gen){ table (eventPlaceTable) } print("Generation ") print(d(thisgen)) print("\n") "\n\n\\generation{" d(thisgen) "}" "{" surname(topguy) "}" "\n" "\n\\addcontentsline{toc}{section}{Generation " d(thisgen) "}\n" set(curgen, thisgen) set(last_grandparents,0) indiset(last_grandparentset) set(printed_brace,0) if (eq(curgen,maxgenprint)){ set(atmax_generation,1) } else { set(atmax_generation,0) } } /* decide if we have the same grandparents or not */ /* I try to group people together with over/under braces for people descended from the same grandparent in this descendency */ /* rather than remember who belongs to what line, I just look at all their grandparents and if they overlap with the grandparents of the previous person, then I assume I'm on the same line. This isn't always true, but it is a start, at least. */ if (gt(curgen,3)){ if (eq(0,last_grandparents)){ "\n" "$\\overbrace{\\hspace*{3in}}$" "\n" set(printed_brace,1) set(just_printed_brace,1) indiset(hisset) addtoset(hisset,indi,1) set(grandparentset,parentset(parentset(hisset))) set(last_grandparentset,grandparentset) set(last_grandparents,1) } else{ indiset(hisset) addtoset(hisset,indi,1) set(grandparentset,parentset(parentset(hisset))) set(doit,1) indiset(extraSet) set(extraSet,intersect(grandparentset,last_grandparentset)) forindiset(extraSet,joe,a,b){ set(doit,0) } if (doit){ if (printed_brace){ "\n\\nobreak" "\n" "$\\underbrace{\\hspace*{3in}}$" "\n\n" } "\n" "$\\overbrace{\\hspace*{3in}}$" "\n\n" set(printed_brace,1) set(just_printed_brace,1) /* also reset the place table after each set of grandchildren. This makes it repeat the whole location name the next time it sees any location. Otherwise, it can get too far from the introduction of the place for my liking. */ if (dumpplacetable_each_gen){ table (eventPlaceTable) } } set(last_grandparentset,grandparentset) set(last_grandparents,1) } } print(d(out)) print(" ") print(name(indi)) print("\n") /* only do the vspace between people if there was no overbrace printed. Otherwise there is too much white space and it looks icky. */ if(eq(0,just_printed_brace)){ "\n\\vspace{3ex}\\ \\\\" } set(just_printed_brace,0) "\\begin{center}{\\large\\bf " d(out) "\\ " name(indi) "}\\end{center}\n" "\\nobreak\n" insert(stab, save(key(indi)), out) call longvitals(indi, 1, 2) if (hadsplitnote){ set (this_level_hadsplitnote,1)} addtoset(idex, indi, 0) set(out, add(out, 1)) /* check whether the children we are about to print are at the Max generation */ set(save_atmax_generation,atmax_generation) if (eq(add(curgen,1),maxgenprint)){ set(atmax_generation,1) } families(indi, fam, spouse, nfam) { "\n\n" if (eq(0, nchildren(fam))) { call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } call havehadchildren(indi, spouse) } elsif (and(spouse, lookup(stab, key(spouse)))) { "Children of " call texname(inode(indi), 0) "\\ and " call texname(inode(spouse), 0) "\\ are shown under " call texname(inode(spouse), 0) "(" d(lookup(stab, key(spouse))) ").\n" } else { "Children of " call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } ":\n\\begin{childrenlist}\n" children(fam, child, nchl) { set(haschild, 0) families(child, cfam, cspou, ncf) { if (ne(0, nchildren(cfam))) { set(haschild, 1) } } if (and(haschild,lt(curgen,maxgenprint))) { if (not(lookup(stab, key(child)))){ enqueue(ilist, child) enqueue(glist, add(1, curgen)) "\n\\item[{\\bf " d(in) "}\\ \\hfill" "\\addtocounter{childnumber}{1}" "{\\sc\\roman{childnumber}}.]" set (in, add (in, 1)) call shortvitals(child) } else { "\n\\item[{\\bf " d(lookup(stab, key(child))) "}\\ \\hfill" "\\addtocounter{childnumber}{1}" "{\\sc\\roman{childnumber}}.]" call shortvitals(child) " Details of " pn(child,3) " family were shown earlier." } } else { if (haschild){ set(force_desc_chart,1) } "\n\\item " call longvitals(child, 0, 1) set(force_desc_chart,0) addtoset(idex, child, 0) } } "\\end{childrenlist}\n" } } set(atmax_generation,save_atmax_generation) if (eq (indi,topguy)){ set (descFigureLabel, save (concat (key (indi), "-figure-desc"))) "\nA brief chart of the descendents of this line is contained in " "Figure~\\ref{" descFigureLabel "}." "\n\\begin{figure*}\n" "\\centering\n" call desc_chart_main3(indi) "\n\\caption{Descendents of " fullname(indi,0,1,99) "({\\bf " d(lookup(stab, key(indi))) "})}" nl() "\\label{" descFigureLabel "}" "\\end{figure*}\n" } } } /* Close off the last braces if necessary */ if (printed_brace){ "\n\\nobreak" "\n" "$\\underbrace{\\hspace*{3in}}$" "\n\n" } set(printed_brace,0) while (indi, dequeue(excurlist)) { call excursion(indi) } } /* Run this routine if you want an ahnentafel style report for the individuals named */ proc ancestor_chapterproc(topguy) { list(ilist) /* List of individuals */ list(glist) /* List of generation for each individual */ list(alist) set (chapterTitle, save ( concat (fullname (topguy, 0, 1, 99), "\ Ancestors"))) "\n\\chapter{" chapterTitle "}" "\n" enqueue(ilist, topguy) enqueue(alist,1) enqueue(glist, 1) set(curgen, 0) insert(stab, save(key(topguy)), 1) while (indi, dequeue(ilist)) { set(ahnen, dequeue(alist)) set(thisgen, dequeue(glist)) if (ne(curgen, thisgen)) { print("Generation ") print(d(thisgen)) print("\n") "\n\n\\generation{" d(thisgen) "}" "{" surname(topguy) "}" "\n" "\n\\addcontentsline{toc}{section}{Generation " d(thisgen) "}\n" set(curgen, thisgen) /* reset the place table at each generation if asked to. */ if (dumpplacetable_each_gen){ table (eventPlaceTable) } } print(d(ahnen)) print(" ") print(name(indi)) print("\n") "\n\\vspace{3ex}\\ \\\\" "\\begin{center}{\\large\\bf " d(ahnen) "\\ " name(indi) "}\\end{center}\n" /****************************************************************/ /* first, enqueue his parents onto the lists so their numbers will be printed out in the description of "indi" */ /* also includes a check to see if indi's parents are already there such as will happen when cousins marry. */ set(print_dad_note,0) set(print_mom_note,0) if (par,father(indi)) { if (not(lookup(stab,key(par)))){ enqueue(ilist, par) enqueue(alist, mul(2,ahnen)) enqueue(glist, add(curgen, 1)) insert(stab, save(key(par)), mul(2,ahnen)) } else { set(print_dad_note,key(par)) } } if (par,mother(indi)) { if (not(lookup(stab,key(par)))){ enqueue(ilist, par) enqueue(alist, add(1,mul(2,ahnen))) enqueue(glist, add(curgen, 1)) insert(stab, save(key(par)), add(1,mul(2,ahnen))) } else { set(print_mom_note,key(par)) } } /****************************************************************/ /* now to print out info about this person */ call longvitals(indi, 1, 2) addtoset(idex, indi, 0) families(indi, fam, spouse, nfam) { "\n\n" if (eq(0, nchildren(fam))) { call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } call havehadchildren(indi, spouse) } elsif (and(female(indi),and(spouse, lookup(stab, key(spouse))))) { /* note that the form of that if is different here than in descendent charts. It is different because we explicity form the queue by adding the father before the mother. Thus, for the parent-set, the children will be printed under the father. We don't check to see if the father's spouse had them previously printed because that would only happen if a different (non-ancestor) wife also happened to be an ancestor from a different branch, which could happen, but has to be pretty rare. (E.g. your dad's dad marries your mom's mom for the 2nd marriage for both of them, something like that. Ick.) */ "Children of " call texname(inode(indi), 0) "\\ and " call texname(inode(spouse), 0) "\\ are shown under " call texname(inode(spouse), 0) "(" d(lookup(stab, key(spouse))) ").\n" } else { "Children of " call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } ":\n\\begin{childrenlist}\n" children(fam, child, nchl) { set(haschild, 0) families(child, cfam, cspou, ncf) { if (ne(0, nchildren(cfam))) { set(haschild, 1) } } "\n\\item " if (not(lookup(stab, key(child)))){ call longvitals(child, 0, 1) addtoset(idex, child, 0) } else { call shortvitals(child) " Details of " pn(child,3) " family were shown earlier " "({\\bf " d(lookup(stab, key(child))) "})" "." } } "\\end{childrenlist}\n" } } /* if his parents are not numbered as expected, tell 'em so. */ if(ne(0,print_dad_note)){ "\n Note that " pn(indi,3) " father " "({\\bf " d(lookup(stab, print_dad_note)) "})" " is not found in the usual " "ahnentafel-style numbering place due to intermarriages.\n" } if(ne(0,print_mom_note)){ "Note that " pn(indi,3) " mother " "({\\bf " d(lookup(stab, print_mom_note)) "})" " is not found in the usual " "ahnentafel-style numbering place due to intermarriages.\n" "\n" } if (eq (indi,topguy)){ call pedigreeFigure (indi) if (strcmp (pedigreeFigureLabel, "")) { pn (indi, 2) " pedigree is illustrated in Figure \\protect\\ref{" pedigreeFigureLabel "}." } } } } /* shortvitals(indi): Displays the short form of the vital statistics (birth and death only) of an individual. */ proc shortvitals(indi) { call resetdayplace() call texname(inode(indi), 1) set(b, birth(indi)) set(d, death(indi)) set(local_dead,global_dead) /* save for restore */ set(global_dead,d) if (and(b, long(b))) { call process_event(b) if (and(d, long(d))) {" and " pn(indi,1) call process_event(d) } } else{ /* know death info, not birth*/ if (and(d, long(d))) {call process_event(d) } } "." set(global_dead,local_dead) /* restore */ } /* longvitals(i, name_parents, name_type) Prints out the complete vital statistics of the individual (i). If name_parents is not 0, then the names of the parents of the individual will be printed. The parameter name_type is passed to texname. The GEDCOM tags are divided into ones that would likely occur before getting married and ones that would likely occur after getting married. Within the two sets they are printed in the order in which they appear in the database. I haven't yet figured out a convenient way of indicating the sex. */ proc longvitals(i, name_parents, name_type) { call resetdayplace() set(local_dead,global_dead) /* save for restore */ set(global_dead,death(i)) call texname(inode(i), name_type) call print_sources(inode(i)) call getValue(inode(i),"NAME") if (gotValue){ call print_sources(gottenNode) } /* remember the value so it doesn't affect spousevitals */ set(save_force_chart,force_desc_chart) set(force_desc_chart,0) set(dad, father(i)) set(mom, mother(i)) if (and(name_parents, or(dad, mom))) { ", " if (male(i)) { "the son of " } elsif (female(i)) { "the daughter of " } else { "the child of " } if (dad) { call texname(inode(dad), 0) if (lookup(stab, key(dad))){ "({\\bf " d(lookup(stab, key(dad))) "})" } } if (and(dad, mom)) { "\nand " } if (mom) { call texname(inode(mom), 0) if (lookup(stab, key(mom))){ "({\\bf " d(lookup(stab, key(mom))) "})" } } ",\n" } set(name_found, 0) set (needname,0) set (canUseAnd,1) set (printedOne,1) /* at the start, we have just printed his fullname*/ set (pronoun," ") set (anythingprinted,0) set (putPeriod,0) /* there is a mistake in this for right now, if we don't have any pre-marriage info, it'll be ugly for the death.*/ fornodes (inode(i), n) { if (not(printedOne)){ if (needname){ call printfirstname(i) set(pronoun,namereturn) set (needname,0) set (canUseAnd,1) set (printedOne,1) set (putPeriod,0) set (pronoun," ") } else { if (canUseAnd) { set (pronoun," and ") set (canUseAnd,0) set (printedOne,1) set (putPeriod,1) } else { /* set up for "He" this time, "and" next time. */ /* put the period in for the first time */ if (not(anythingprinted)) { set (putPeriod,1)} else { set (putPeriod,0)} set (pronoun,pn (i,0)) set (canUseAnd,1) set (printedOne,1) } } set (anythingprinted,1) }/* end if not printedone */ if (or(eq(strcmp(tag(n), "ADOP"), 0), or(eq(strcmp(tag(n), "BAPL"), 0), or(eq(strcmp(tag(n), "BAPM"), 0), or(eq(strcmp(tag(n), "BARM"), 0), or(eq(strcmp(tag(n), "BASM"), 0), or(eq(strcmp(tag(n), "BIRT"), 0), or(eq(strcmp(tag(n), "BLES"), 0), or(eq(strcmp(tag(n), "CONF"), 0), or(eq(strcmp(tag(n), "CONL"), 0), or(eq(strcmp(tag(n), "ORDN"), 0), eq(strcmp(tag(n), "CHR"), 0) ))))))))))){ pronoun set(printedOne,0) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "GRAD"), 0)) { pronoun set(printedOne,0) " graduated from " call valuec(n) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "CAST"), 0)) { pronoun set(printedOne,0) " was a member of Caste: " call valuec(n) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "NAME"), 0)) { if (eq(name_found, 0)) { set(name_found, 1) } else { pronoun set(printedOne,0) " was also known as " call texname(n, 3) call print_notes(n, " ") call print_sources(n) if (putPeriod) {". "} "\n" } } if (eq(strcmp(tag(n), "NAMR"), 0)) { pronoun set(printedOne,0) " had the religious name of: " call valuec(n) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "RELI"), 0)) { pronoun set(printedOne,0) " was a " call valuec(n) call process_event(n) if (putPeriod) {". "} } /* if (eq(strcmp(tag(n), "TITL"), 0)) { pronoun set(printedOne,0) " held the title of " value(n) call print_sources(n) if (putPeriod) {". "} "\n" }*/ } if (and(putPeriod,anythingprinted)) {". "} set(inhibit_text_charts,0) if (eq(1, nfamilies(i))) { families(i, f, s, n) { if (s){ if (anythingprinted) {pn (i,0) } set(anythingprinted,1) call illegit_check(f) if (not_married_flag){ " had a child with" } else{ " married" } /* it is OK to assume they had children if the Not married flag is raised. Cuz if they weren't married and didn't have kids, there isn't much point in the family existing (as far as this program is concerned). */ call print_sources(fnode(f)) call spousevitals(s, f) } } } else { families(i, f, s, n) { if (anythingprinted) { /* print "he" (or "she") for first marriage, and his first name for all later marriages */ if (gt(n,1)){ call printfirstname(i) namereturn } else {pn (i,0) } } set(anythingprinted,1) if (s){ call illegit_check(f) if (not_married_flag){ " had child(ren) with " } else{ " married " } ord(n) "," call print_sources(fnode(f)) call spousevitals(s, f) /* make sure we don't print this (i) persons text and charts a second time. The theory here being that if the spouse is in the stab, then this person (i) has already had their notes/charts done as part of their spouse. We don't want to print a 2nd time */ if (not(ancestormode)){ if (lookup(stab, key(s))){ set(inhibit_text_charts,1) } } } else{ " " ord(n) " had a child with an unknown spouse. " } } } " " /* if (anythingprinted){ call getText(inode(i),0) }*/ /* otherwise hold off on getText until after the death info & all */ /* I changed my mind. I like getText at the end. */ set (needname,1) set (canUseAnd,0) set (putPeriod,0) if (anythingprinted){ set (printedOne,0) /* haven't printed a name here after the spouse info */ /* this works because pronoun is still a blank */ } else{ set (printedOne,1) /* we still have his name from way at the start */ set (putPeriod,1) /* JUST ADDED THIS LINE 5/24/96. Don't know if works */ /* test it on Galbraith kids where know only death.*/ } fornodes (inode(i), n) { if (not(printedOne)){ if (needname){ call printfirstname(i) set(pronoun,namereturn) set (needname,0) set (canUseAnd,1) set (printedOne,1) set (putPeriod,0) } else { if (canUseAnd) { set (pronoun," and ") set (canUseAnd,0) set (printedOne,1) set (putPeriod,1) } else { set (pronoun,pn (i,0)) set (canUseAnd,1) set (printedOne,1) set (putPeriod,0) } } } if (or(eq(strcmp(tag(n), "BURI"), 0), or (eq(strcmp(tag(n), "CENS"), 0), or (eq(strcmp(tag(n), "CHRA"), 0), or (eq(strcmp(tag(n), "DEAT"), 0), or (eq(strcmp(tag(n), "NATU"), 0), or (eq(strcmp(tag(n), "RETI"), 0), or (eq(strcmp(tag(n), "RESI"), 0), or (eq(strcmp(tag(n), "PROB"), 0), eq(strcmp(tag(n), "WILL"), 0) ))))))))){ pronoun set(printedOne,0) call process_event(n) if (putPeriod) {". "} } /* One part of the GEDCOM standard says the tag should be DSCR, another part says DESR. */ if (eq(strcmp(tag(n), "DESR"), 0)) { pronoun set(printedOne,0) "Description: " call valuec(n) call print_sources(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "EVEN"), 0)) { pronoun set(printedOne,0) value(n) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "OCCU"), 0)) { pronoun set(printedOne,0) /* should also check for a RETIred node and always say WAS if it exists */ call getValue(inode(i),"RETI") if (gotValue){ " was"} else { call iswas(i)} " " call aAn(value(n)) " " call valuec(n) call process_event(n) if (putPeriod) {". "} } if (eq(strcmp(tag(n), "PROP"), 0)) { pronoun set(printedOne,0) "had possessions: " call valuec(n) "." call print_sources(n) if (putPeriod) {". "} } } if (putPeriod) {". "} /* restore forcing of desc. charts */ set(force_desc_chart,save_force_chart) if (not(inhibit_text_charts)){ call getText(inode(i),0) call process_book_notes (i) } set(global_dead,local_dead) /* restore */ } /* spousevitals (spouse, fam) Prints out information about a marriage (fam) and about a spouse in the marriage (spouse). */ proc spousevitals (spouse, fam) { call texname(inode(spouse), 3) if (spouse){ call print_sources(inode(spouse)) call getValue(inode(spouse),"NAME") if (gotValue){ call print_sources(gottenNode) } } if (e, marriage(fam)) { call process_event(e) } ". " call check_print_divinfo(fam) if (spouse) { set(bir, birth(spouse)) set(chr, baptism(spouse)) set(dea, death(spouse)) set(bur, burial(spouse)) set(dad, father(spouse)) set(mom, mother(spouse)) set(local_dead,global_dead) /* save for restore */ set(global_dead,dea) if (or(or(or(or(or(bir, chr), dea), bur), mom), dad)) { call printfirstname(spouse) namereturn if (or(mom, dad)) { ", " if (male (spouse)) { "the son of " } elsif (female(spouse)) { "the daughter of " } else { "the child of " } if (dad) { call texname(inode(dad), 3) if (lookup(stab, key(dad))){ "({\\bf " d(lookup(stab, key(dad))) "})" } } if (and(mom, dad)) { " and " } if (mom) { call texname(inode(mom), 3) if (lookup(stab, key(mom))){ "({\\bf " d(lookup(stab, key(mom))) "})" } ", " } } if (or(or(or(bir, chr), dea), bur)) { if (bir) { call vitalEvent(bir,1) call print_sources(bir) if (chr) { " and" call vitalEvent(chr,0) call print_sources(chr) ". " } if (dea){ if (chr){ pn(spouse,0)} else {" and"} call vitalEvent(dea,1) call print_sources(dea) ". " } else {if (not(chr)){ ". "}} /* born, but nothing more */ } if (and(chr, not(bir))) { call vitalEvent(chr,1) call print_sources(chr) ". " } if (and(dea,not(bir))) { /* if bir, then dea is already handled */ if (chr) { /* then need to print pronoun, otherwise don't since we still have the name standing there, not finishing a sentence */ pn(spouse,0) } call vitalEvent(dea,1) call print_sources(dea) ". " } if (bur) { if (or(or(bir,dea),chr)){ pn(spouse,0)} call vitalEvent(bur,0) call print_sources(bur) ".\n" } } } if (gt(nfamilies(spouse),1)) { set(beforefam,1) families(spouse, newfam, newspouse, n) { if(ne(newfam,fam)){ call printfirstname(spouse) namereturn if (beforefam){ " had " if (gt(n,1)){"also "} "previously married " } else { " later remarried " } if (newspouse){ call texname(inode(newspouse), 3) } set(e,marriage(newfam)) if (e){ call process_event(e) } if (gt(nchildren(newfam),0)){ ", and had " d(nchildren(newfam)) if (gt(nchildren(newfam),1)){ " children " } else { " child"} " by that marriage: " children(newfam,stepchild,numerical){ if (gt(numerical,1)){ ", "} call printfirstname(stepchild) namereturn } } ". " } else { set(beforefam,0)} /* we see the current family */ } } if (not(lookup(stab, key(spouse)))){ /* don't print a 2nd time */ call getValue(inode(spouse),"OCCU") if (gotValue){ set (savenode,gottenNode) call printfirstname(spouse) namereturn /* should also check for a RETIred node and always say WAS if it exists */ call getValue(inode(spouse),"RETI") if (gotValue){ " was"} else { call iswas(spouse)} " " call aAn(value(savenode)) " " call valuec(savenode) call process_event(savenode) ". " } call getText(inode(spouse),0) call process_book_notes (spouse) } set(global_dead,local_dead) /* restore */ } else { "\\noname" ".\n" } } /* texname (i, type) Prints an individual's name in LaTeX format, with the surname in small caps. For example, "David Kenneth /Olsen/ Jr." would be printed as "David Kenneth {\sc Olsen} Jr.". The type argument determines how the name will appear in the index. type = 0: no index type = 1: page number appears in bold type = 2: page number appears in bold-italics type = 3: page number appears in normal text The parameter i can be either an INDI node (NOT an individual) or a NAME node. */ proc texname (i, type) { list(name_list) set(sname, "") extractnames(i, name_list, num_names, surname_no) forlist (name_list, nm, num) { if (eq(num, surname_no)) { if (eq(strcmp(nm, ""), 0)) { " \\noname" set(sname, "\\noname") } else { if (eq(strcmp(nm, "____"), 0)) { set(sname, "\\noname") } else { " {\\sc " save(nm) "}" set(sname, nm) } } } else { " " nm } } if (gt(type, 0)) { "\\index{" sname if (gt(num_names, 1)) { "," } forlist (name_list, nm, num) { if (ne(num, surname_no)) { " " nm } } if (eq(type, 1)) { "|bold"} elsif (eq(type, 2)) { "|bfit"} "}" } } /* process_event (event_node, event_name) Prints information about a particular event (event_node, which is a GEDCOM node). event_name is verb form of the text describing the event (such as "Born", "Died", etc.). */ proc process_event (event_node) { call vitalEvent(event_node,0) call print_sources(event_node) call print_notes(event_node, " ") } proc inPlace (event) { if (place (event)) { if (eq(strcmp(place(event),""),0)) { " in \\noname" } else { call atAddr (event) if (not (strcmp(atAddrValue,""))){ set(fullSpecCompare,1)} else { set(fullSpecCompare,2)}/* there was an ADDR. We want to say at X in Y */ list (placeList) list (placeTextList) list (placeTagList) extractplaces (event, placeList, nPlaces) requeue (placeList, atAddrValue) while (placeText, dequeue (placeList)) { enqueue (placeTextList, placeText) set (placeTag, placeText) forlist (placeList, place, placeN) { set (placeTag, save (concat (placeTag, concat ("-", place)))) } enqueue (placeTagList, placeTag) } set (there, getel (placeTagList, 1)) if (not (strcmp (there, lookup (eventPlaceTable, "@there@")))) { "\nthere" } else { insert (eventPlaceTable, "@there@", there) set (fullySpecified, 0) forlist (placeTextList, place, placeN) { set (placeTag, dequeue (placeTagList)) if (not (eq(fullySpecified,fullSpecCompare))) { if (eq (placeN, 2)) { /* if the name of the place doesn't start with "near", say "in" */ if (and(strcmp (substring (place,1,4), "near"), and (strcmp (substring (place,1,2), "in"), and (strcmp (substring (place,1,5), "south"), and (strcmp (substring (place,1,5), "north"), and (strcmp (substring (place,1,4), "west"), and (strcmp (substring (place,1,4), "from"), strcmp (substring (place,1,4), "east")))))))) /* note that case matters a lot in that comparison */ /* a town might be named North English, but one should always have written, "north of English" if you just want to say it is outside of town */ { "\nin " } else { if (not(strcmp (substring (place,1,4), "from"))){" and was\n"} /* Actually, that isn't quite what I want because if it has someone b. PLAC from there but no date, it'll wind up outputting "He was born and was from there". But oh well. */ else{"\n"} /* put nothing there if it says "near" */ } } elsif (gt (placeN, 2)) { ", " } place if (strlen (place)) { if (not (lookup (eventPlaceTable, placeTag))) { insert (eventPlaceTable, placeTag, 1) /* this next fiddling with fullSpecCompare is because the FIRST time we see an "at ADDR in a,b,c" since ADDR-a-b-c isn't in the table, it would try to print "at ADDR in a,b". We just want it to print "at ADDR in a" if a,b,c was previously defined. */ set(fullSpecCompare,1) } else { set (fullySpecified, add(fullySpecified,1)) } if (gt(index(place,"Twp",1),0)) { /* then it is just the name of a township, which I don't think is much use without the county name, so I'm always going to force it to print the county name if it gives a township */ set(fullSpecCompare,add(1,fullSpecCompare)) } } }/* end if not fullySpecified */ } } }/* matches the else for place being non-null */ } } /* Possible customization I have chosen not to implement: Suggested by: "John F. Chandler" if(gt(nPlaces,1)) { set(inWord,"at") } else { set(inWord,"in") } if(not(strcmp(tag(event),"IMMI"))) { set(inWord,"to") } if(not(strcmp(tag(event),"GRAD"))) { if(eq(nPlaces,1)) { set(inWord,"from") } else { set(inWord,"-") } } inWord " " instead of the original "in ". This assumes that the institution is recorded in the PLAC I (DN) Think there is a little more to it than that because of the way I currently use atAddr, but I'm sure you can figure all that out. I currently assume that the institution name is the value of the 1 GRAD line, e.g. 1 GRAD Univ. of Iowa and I handle it as a special case. */ proc atAddr (root) { set (atAddrValue, "") if (root) { fornodes (root, node) { if (not (strcmp (tag (node), "PLAC"))) { fornodes (node, subnode) { if (and (not (strcmp (atAddrValue, "")), or (not (strcmp (tag (subnode), "ADDR")), not (strcmp (tag (subnode), "CEME"))))) { if (val, value (subnode)) { set (atAddrValue, save (concat ("\nat ", val))) } } } } } } } proc check_print_divinfo(fam) { call getValue (fnode(fam), "DIV") if (gotValue) { " They divorced" call process_event(gottenNode) ". " } } /* print_notes (root, sep): Prints all the notes (NOTE nodes) associated with the GEDCOM line root, separated by the given separator. */ proc print_notes (root, sep) { fornotes (root, note) { sep note /* " "*/ } } global(pedigreeFigureLabel) proc process_book_notes (indi) { set(hadpednote,0) set(haddescnote,0) set(doexcursion,0) fornotes (inode(indi), note) { set (i, index(note,"BOOKPEDIGREE",1)) if (gt(i,0)){ set(hadpednote,1) } set (i, index(note,"BOOKDESCENDENT",1)) if (gt(i,0)){ set(haddescnote,1) } set (i, index(note,"BOOKEXCURSION",1)) if (gt(i,0)){ set(doexcursion,1) } set (i, index(note,"BOOKCHAPSPLIT",1)) if (gt(i,0)){ set(hadsplitnote,1) } } if (eq(hadpednote,1)){ call pedigreeFigure (indi) if (strcmp (pedigreeFigureLabel, "")) { pn (indi, 2) " pedigree is illustrated in Figure \\protect\\ref{" pedigreeFigureLabel "}." } } if (force_desc_chart) { set(haddescnote,1) } if (eq(haddescnote,1)){ set (descFigureLabel, save (concat (key (indi), "-figure-desc"))) "\nA brief chart of the descendents of " call texname(inode(indi), 3) " is contained in " "Figure~\\ref{" descFigureLabel "}." "\n\\begin{figure*}\n" "\\centering\n" call desc_chart_main3(indi) "\n\\caption{Descendents of " fullname(indi,0,1,99) "({\\bf " d(lookup(stab, key(indi))) "})}" nl() "\\label{" descFigureLabel "}" "\\end{figure*}\n" } if (eq(0,ancestormode)){ if (eq(doexcursion,1)){ pn (indi, 2) " ancestors will be discussed in depth on page~\\pageref{" key(indi) "-excur-ref}" " in this chapter.\n\n" enqueue(excurlist,indi) } } } proc pedigreeFigure (i) { indiset (iSet) addtoset (iSet, i, 1) set (max, 0) indiset (extraSet) set(extraSet,ancestorset (iSet)) forindiset (extraSet, indi, val, num) { if (gt (val, max)) { set (max, val) } } if (gt (max, 1)) { set (pedigreeFigureLabel, save (concat (key (i), "-figure-pedigree"))) if (gt (max, 5)) { set (max, 5) } call figPed (max, i) } else { set (pedigreeFigureLabel, "") } } proc figPed (n, indi) { "\n\\begin{figure*}" "\n\\centering" "\n\\small" "\n\\setlength{\\unitlength}{" if (eq (n, 5)) { ".8" } else { ".9" } "\n\\baselineskip}" call pow (2, n) "\n\\begin{picture}(" d (add (mul (6, n), 12)) "," d (sub (mul (powValue, 2), 1)) ")(0,.5)" call ped6 (indi, 0, powValue, powValue) "\n\\end{picture}" "\n\\caption{Pedigree of " call scname (indi) "}" "\n\\label{" pedigreeFigureLabel "}" "\n\\end{figure*}" } proc ped6 (indi, x, y, z) { "\n\\put(" d(mul (x, 6)) "," d(y) "){\\makebox(0,0)[l]{" call scname (indi) "}}" if (x) { "\n\\put(" d (sub (mul (x, 6), 3)) "," d(y) "){\\line(1,0){" d(3) "}}" "\n\\put(" d (sub (mul (x, 6), 3)) "," d(y) "){\\line(0," if (female (indi)) { "1" } else { "-1" } "){" d (sub (z, 1)) ".4}}" } if (z2, div (z, 2)) { if (f, father (indi)) { call ped6 (f, add (x, 1), add (y, z2), z2) } if (m, mother (indi)) { call ped6 (m, add (x, 1), sub (y, z2), z2) } } } proc scname (indi) { fullname(indi,0,1,99) if (lookup(stab, key(indi))){ "({\\bf " d( lookup(stab, key(indi))) "})" } } proc pow (x, i) { set (powValue, 1) call powIt (x, i) } proc powIt (x, i) { if (i) { set (powValue, mul (powValue, x)) call powIt (x, sub (i, 1)) } } /* print_sources (root) Prints all sources (SOUR lines) associated with the given GEDCOM line. The sources are formated as LaTeX footnotes. This routine prints each SOUR line as a separate footnote, which is not correct. This should be corrected so that all sources are combined into a single footnote. */ proc print_sources (root) { enqueue(sourceList,root) call sourceIt(sourceList) } /* valuec(n): Prints the value of a GEDCOM node and the values of any CONT lines associated with it. */ proc valuec(n) { value(n) fornodes (n, n1) { if (eq(strcmp(tag(n1), "CONT"), 0)) { "\n" value(n1) } elsif (eq(strcmp(tag(n1), "CONC"), 0)) { value(n1) } } } proc resetdayplace() { call setDayNumber (0) insert (eventPlaceTable, "@there@", "") } proc vitalEvent (event, reset) { if (reset) { call setDayNumber (0) insert (eventPlaceTable, "@there@", "") } if (event) { if (eventName, lookup (eventNameTable, tag (event))) { " " eventName if (or (not (strcmp (tag (event), "ADOP")), or (not (strcmp (tag (event), "CHR")), not (strcmp (tag (event), "BURI"))))) { set (previousDayNumber, dayNumber) } else { set (previousDayNumber, 0) } } if (not (eventName)) { call getValue(event, "TYPE") if (gotValue) { " " gottenValue } } if (not (strcmp (tag (event), "DEAT"))){ call ofCause (event) } call onDate (event) call atAge (event) call inPlace (event) } } proc setDayNumber (event) { set (dayNumber, 0) if (date (event)) { extractdate (event, day, month, year) /* DAB - Have to check day month and year, otherwise two events for which only the year is known * are said to have occurred on "the same day" */ if (and(and(year, month), day)) { set (yearNumber, add (mul (year, 365), div (year, 4), neg (div (year, 100)), div (year, 400))) set (monthNumber, getel (daysToMonthList, month)) set (leapYear, and (eq (mod (year, 4), 0), not (and (eq (mod (year, 100), 0), ne (mod (year, 400), 0))))) if (and (leapYear, le (month, 2))) { decr (monthNumber) } set (dayNumber, add (yearNumber, monthNumber, day)) } } } /* This was the old way, replaced by the above by Jim Eggert EggertJ@LL.MIT.EDU*/ /* proc setDayNumber (event) { set (dayNumber, 0) if (date (event)) { extractdate (event, day, month, year) if (year) { set (yearNumber, sub (add (mul (year, 365), div (year, 4)), div (year, 400))) set (monthNumber, getel (daysToMonthList, month)) set (leapYear, and (eq (mod (year, 4), 0), not (and (eq (mod (year, 100), 0), ne (mod (year, 400), 0))))) if (and (leapYear, gt (month, 2))) { incr (monthNumber) } set (dayNumber, add (yearNumber, add (monthNumber, day))) } } } */ proc atAge (event) { call getValueCont (event, "AGE") if (gotValue) { if (not (strcmp (gottenValue, "young"))) { "\nyoung" } elsif (not (strcmp (gottenValue, "0"))) { "\nas an infant" } elsif (not (strcmp (gottenValue, "infancy"))) { "\nas an infant" } else { "\nat age " gottenValue } } } proc ofCause (event) { call getValueCont (event, "CAUS") if (gotValue) { "\nof " gottenValue } } proc onDate (event) { if (atmax_generation) { if (global_dead) { set(year_only,0) } else { set(year_only,1) } } else { set(year_only,0) } call setDayNumber (event) if (d, date (event)) { if (strcmp (d, "Not married")) { if (eq(strcmp(d, ""),0)) { "\nin \\nodate\\ " } elsif (eq (index (d, "AFT", 1), 1)) { "\nsome time after " } elsif (eq (index (d, "Aft", 1), 1)) { "\nsome time after " } elsif (eq (index (d, "BEF", 1), 1)) { "\nsome time before " } elsif (eq (index (d, "Bef", 1), 1)) { "\nsome time before " } elsif (eq (index (d, "ABT", 1), 1)) { "\ncirca " } elsif (eq (index (d, "Abt", 1), 1)) { "\ncirca " } elsif (i, index (d, "-", 1)) { "\nbetween " substring (d, 1, sub (i, 1)) " and " substring (d, add (i, 1), strlen (d)) set (event, 0) } elsif (and (dayNumber, eq (dayNumber, previousDayNumber))) { "\non the same day" set (event, 0) } elsif (and (dayNumber, eq (dayNumber, add (previousDayNumber, 1)))) { "\non the next day" set (event, 0) } elsif (and (dayNumber, eq (dayNumber, add (previousDayNumber, 2)))) { "\ntwo days later" set (event, 0) } elsif (and (dayNumber, eq (dayNumber, add (previousDayNumber, 7)))) { "\none week later" set (event, 0) } else { if (year_only){ "\nin " } else { extractdate (event, d, m, y) if (d) { "\non " } else { "\nin " } } } if (event) { if (and (dayNumber, eq (dayNumber, previousDayNumber))) { "that day" } else { if (year_only){ year (event) } else { stddate (event) } } } } } } proc getValue (root, t) { set (gotValue, 0) if (root) { fornodes (root, node) { if (and (not (gotValue), not (strcmp (tag (node), t)))) { set (gotValue, 1) set (gottenNode, node) set (gottenValue, save (value (node))) } } } } proc getValueCont (root, t) { set (gotValue, 0) if (root) { fornodes (root, node) { if (and (not (gotValue), not (strcmp (tag (node), t)))) { set (gotValue, 1) set (gottenNode, node) set (gottenValue, save (value (node))) fornodes (node, subnode) { if (not (strcmp ("CONT", tag (subnode)))) { /* If you want empty CONT tags to not leave a blank line, uncomment the following "if". * However, a blank line can be very useful (or even necessary) for some TeX formatting. */ /*if (strlen (value (subnode))) {*/ set (gottenValue, save (concat (gottenValue, concat ("\n", value (subnode))))) /*}*/ } elsif (not (strcmp ("CONC", tag (subnode)))) { /* Same comment as above, this time for CONC tags */ /*if (strlen (value (subnode))) {*/ set (gottenValue, save (concat (gottenValue, value (subnode)))) /*}*/ } } } } } } proc getValueCommaCont (root, t) { set (gotValue, 0) if (root) { fornodes (root, node) { if (and (not (gotValue), not (strcmp (tag (node), t)))) { set (gotValue, 1) set (gottenNode, node) set (gottenValue, save (value (node))) fornodes (node, subnode) { if (not (strcmp ("CONT", tag (subnode)))) { if (strlen (value (subnode))) { set (gottenValue, save (concat (gottenValue, concat (",\n", value (subnode))))) } } elsif (not (strcmp ("CONC", tag (subnode)))) { if (strlen (value (subnode))) { set (gottenValue, save (concat (gottenValue, value (subnode)))) } } } } } } } proc aAn (s) { set (s, save (trim (lower (s), 1))) if (not (strcmp (s, "a"))) { "an" } elsif (not (strcmp (s, "e"))) { "an" } elsif (not (strcmp (s, "i"))) { "an" } elsif (not (strcmp (s, "o"))) { "an" } elsif (not (strcmp (s, "u"))) { "an" } elsif (not (strcmp (s, "x"))) { "an" } else { "a" } } proc printfirstname(i) { set(firstname,givens(i)) if (eq(strcmp(firstname,""), 0)) { set(namereturn,save("\\noname")) } else { set (where,index(firstname," ",1)) /* don't print out middle names */ if (gt(where,0)){ set(namereturn,save(substring(firstname,1,sub(where,1)))) } else {set(namereturn,save(firstname))} /* if no middle names */ } } proc iswas (indi) { call setDayNumber (birth (indi)) if (or (death (indi), or (not (dayNumber), lt (dayNumber, 693971)))) { "\nwas" } else { "\nis" } } /* Check to see if this family might still have children at some point: If one spouse is dead, too old, or they are divorced; then they won't. */ proc havehadchildren (indi, spouse) { call setDayNumber (birth (indi)) set(indiDayNumber, dayNumber) call setDayNumber (birth (spouse)) set(divp, 0) spouses(indi, s, f, n) { if (eq(s, spouse)) { call getValue (fnode(f), "DIV") set(divp, gotValue) break() } } if (or (death (indi), or (not (indiDayNumber), lt (indiDayNumber, 693971)), death (spouse), or (not (dayNumber), lt (dayNumber, 693971)), divp)) { "\\ had no children.\n" } else { "\\ have no children.\n" } } /* illegit_check gives people a break. If we have no marriage record, the assumption still is that the couple were married and that is the word we stick in the text. Only if it specifically says they were not married, do we state that they weren't */ proc illegit_check (fam) { set(not_married_flag, 0) if(e,marriage(fam)) { if (d, date (e)) { if (not (strcmp (d, "Not married"))) { set(not_married_flag, 1) }}} } proc sourceIt (sourceList) { list (cList) list (fList) set(cn, 0) while (root, dequeue (sourceList)) { fornodes (root, node) { if (not (strcmp (tag (node), "SOUR"))) { set (footnote, 1) set (val, value (node)) if (val) { if (reference(val)){ call bibliographize (dereference(val)) } } if (xref (node)) { call bibliographize (node) set (val, xref (node)) } if (val) { set (a1, index (val, "@", 1)) set (a2, index (val, "@", 2)) if (and (eq (a1, 1), eq (a2, strlen (val)))) { set (c, save (substring (val, 2, sub (strlen (val), 1)))) enqueue (cList, c) incr (cn) set (footnote, 0) } } else { set (subnodecount, 0) fornodes (node, subnode) { if (strcmp (tag (subnode), "SOUR")) { incr (subnodecount) } } if (eq (subnodecount, 0)) { fornodes (node, subnode) { set (val, value (subnode)) /* With loadsources, this is needed here. It is technically illegal gedcom. */ if (xref (subnode)) { call bibliographize (subnode) set (val, xref (subnode)) } if (val) { set (a1, index (val, "@", 1)) set (a2, index (val, "@", 2)) if (and (eq (a1, 1), eq (a2, strlen (val)))) { set (c, save (substring (val, 2, sub (strlen (val), 1)))) enqueue (cList, c) incr (cn) } } } set (footnote, 0) } } if (footnote) { enqueue (fList, node) } } } } while (cn) { forlist (cList, c, n) { if (and (ne (n, cn), not (strcmp (c, getel(cList, cn))))) { setel (cList, cn, "") } } decr (cn) } if (not (empty (fList))) { "\n\\footnote{" while (f, dequeue (fList)) { set (first, 1) call getValueCont (f, "TITL") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } "\n" gottenValue } call getValueCont (f, "DATE") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } "\n" gottenValue } call getValueCont (f, "PLAC") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } "\n" gottenValue } call getValueCont (f, "VOLU") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } if (or (index (gottenValue, "-", 1), or (index (gottenValue, ",", 1), index (gottenValue, "and ", 1)))) { "\nVolumes " } else { "\nVolume " } gottenValue } call getValueCont (f, "PAGE") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } if (or (index (gottenValue, "-", 1), or (index (gottenValue, ",", 1), index (gottenValue, "and ", 1)))) { "\nPages " } else { "\nPage " } gottenValue } call getValueCont (f, "FILM") if (gotValue) { if (not (first)) { ", " } else { set (first, 0) } "on Latter Day Saints Microfilm Number " gottenValue } call getValueCont (f, "TEXT") if (gotValue) { set (first, 0) "\n" gottenValue } if (not (first)) { "\\@." } call getValueCont (f, "NOTE") if (gotValue) { set (first, 0) "\n" gottenValue } if (and (first, not (value (f)))) { "\n" } call values (f) } "}" } if (not (empty (cList))) { "\\cite{" while (c, dequeue (cList)) { if (strlen (c)) { if (cn) { "," } c incr (cn) } } "}" } } proc bibliographize (root) { set (val, xref (root)) set (c, save (substring (val, 2, sub (strlen (val), 1)))) if (not (lookup (bibTable, c))) { insert (bibTable, c, 1) /* call getValueCont (root, "TEXT") if (figureFlag, gotValue) { enqueue (figureCiteList, c) enqueue (figureNodeList, gottenNode) }*/ set (cref, save (concat ("\\protect\\ref{", concat (c, "}")))) set (pref, save (concat ("\\protect\\pageref{", concat (c, "}")))) set (b, "\\bibitem") if (figureFlag) { set (b, save (concat (b, concat ("[", concat (cref, "]"))))) } set (b, save (concat (b, concat ("{", concat (c, "} "))))) call getValueCont (root, "TITL") if (gotValue) { set (b, save (concat (b, concat ("{\\em ", concat (gottenValue, "}, "))))) } call getValueCont (root, "AUTH") if (gotValue) { set (b, save (concat (b, concat (" ", concat (gottenValue, ", "))))) } call getValueCont (root, "PUBL") if (gotValue) { set(pubnode,gottenNode) call getValueCont (pubnode, "NAME") if (gotValue) { set (b, save (concat (b, concat ("in {\\em ", concat (gottenValue, "}, "))))) } call getValueCommaCont (pubnode, "ADDR") if (gotValue) { set (b, save (concat (b, concat (gottenValue, ": ")))) } call getValueCont (pubnode, "PUBR") if (gotValue) { set (b, save (concat (b, concat (gottenValue, ", ")))) } call getValueCont (pubnode, "PHON") if (gotValue) { set (b, save (concat (b, concat (gottenValue, ", ")))) } call getValueCont (pubnode, "DATE") if (gotValue) { set (b, save (concat (b, concat (gottenValue, ", ")))) } call getValueCont (pubnode, "VOLU") if (gotValue) { set (word, "Volume ") if (or (index (gottenValue, "-", 1), or (index (gottenValue, ",", 1), index (gottenValue, "and ", 1)))) { set (word, "Volumes ") } set (b, save (concat (b, concat (word, concat (gottenValue, ", "))))) } call getValueCont (pubnode, "NUM") if (gotValue) { set (word, "Number ") if (or (index (gottenValue, "-", 1), or (index (gottenValue, ",", 1), index (gottenValue, "and ", 1)))) { set (word, "Numbers ") } set (b, save (concat (b, concat (word, concat (gottenValue, ", "))))) } call getValueCont (root, "LCCN") if (gotValue) { set (b, save (concat (b, concat ("Call Number ", concat (gottenValue, ", "))))) } } call getValueCont (root, "PAGE") if (gotValue) { set (word, "page ") if (or (index (gottenValue, "-", 1), or (index (gottenValue, ",", 1), index (gottenValue, "and ", 1)))) { set (word, "pages ") } set (b, save (concat (b, concat (word, concat (gottenValue, ", "))))) } call getValueCont (root, "FILM") if (gotValue) { set (b, save (concat (b, concat ("Filmed by the Church of Jesus Christ of Latter Day Saints, Microfilm Number ", concat (gottenValue, ", "))))) } call getValueCont (root, "FICH") if (gotValue) { set (b, save (concat (b, concat ("Filmed by the Church of Jesus Christ of Latter Day Saints, Microfiche Number ", concat (gottenValue, ", "))))) } call getValueCont (root, "REPO") if (gotValue) { set (b, save (concat (b, concat ("at ", concat (gottenValue, ", "))))) } if (index (b, ", ", 1)) { set (b, save (concat (save (substring (b, 1, sub (strlen (b), 2))), "."))) } call getValueCont (root, "NOTE") if (gotValue) { set (b, save (concat (b, concat (" ", gottenValue)))) } call getValueCont (root, "TEXT") if (gotValue) { set (b, save (concat (b, concat (" ", gottenValue)))) } call getValueCont (root, "HIDE") if (gotValue) { set (b, save (concat (b, concat (" ", gottenValue)))) } call getValueCont (root, "SOUR") if (gotValue) { set (bb, "?") if (gottenValue) { set (a1, index (gottenValue, "@", 1)) set (a2, index (gottenValue, "@", 2)) if (and (eq (a1, 1), eq (a2, strlen (gottenValue)))) { set (bb, save (substring (gottenValue, 2, sub (strlen (gottenValue), 1)))) } } set (b, save (concat (b, concat ("\\cite{", concat (bb, "}"))))) } if (figureFlag) { set (b, save (concat (b, concat (" See figure on page~", concat (pref, "."))))) } /* This while loop undoes the line breaking in a CONT/CONC. Since those line breaks can be * significant, it is commented out. */ /* while (i, index (b, "\n", 1)) { set (b, save (concat (substring (b, 1, sub (i, 1)), concat (" ", substring (b, add (i, 1), strlen (b)))))) } */ enqueue (bibList, save (concat (b, "\n"))) } } proc getText (root, paragraph) { set (pronounOkay, 1) if (root) { if(eq(1,notes_text_mode)){ /* only 1 TEXT records */ fornodes (root, node) { if (not (strcmp ("TEXT", tag (node)))) { set (pronounOkay, 0) if (paragraph) { "\n\n" set (paragraph, 0) } call values (node) "\n\n" } } } else { if(eq(2,notes_text_mode)) { /* all 1 NOTE records */ fornotes (root, note) { if (paragraph) { "\n\n" set (paragraph, 0) } note "\n\n" set (pronounOkay, 0) } } else{ /* only !-tagged 1 NOTE records (1st char must be !) */ fornotes (root, note) { set (i, index(note,"!",1)) if (eq(1,i)){ set (pronounOkay, 0) if (paragraph) { "\n\n" set (paragraph, 0) } substring (note,2,strlen(note)) "\n\n" } } } } } /* if we printed any notes, then reset things so we don't use "there" in place names right after the notes. */ if (not (pronounOkay)){ insert (eventPlaceTable, "@there@", "") } } proc values (root) { if (root) { if (strlen (value (root))) { "\n" value (root) } fornodes (root, node) { if (not (strcmp ("CONT", tag (node)))) { if (strlen (value (node))) { "\n" value (node) } } elsif (not (strcmp ("CONC", tag (node)))) { if (strlen (value (node))) { value (node) } } } if (root) { enqueue (sourceList, root) } call sourceIt (sourceList) } } /********************************************************************/ /* below here are routines for printing descendent charts */ /* * These are adapted from desc-tex * By Eric Majani (eric@elroy.jpl.nasa.gov) */ proc desc_chart_main3(indi) { "\\tree\n" call desc_chart_out(indi,3,1) "\\endtree\n" } proc descch_indi(indi) { "{\\bf " call desc_chart_name(indi) "}" if (or(birth(indi),death(indi))){ " " if (e, birth(indi)) { year(e) } "-" if (e, death(indi)) { year(e)} } nl() families(indi,fam,sp,num) { if(e,marriage(fam)) { " m. " short(e) nl()} } } proc desc_chart_name(i) { set (whole,givens(i)) set (space,index(whole," ",1)) if (gt(space,0)){ substring(whole,1,space) } else {whole " "} if (eq(strcmp(surname(i), "____"), 0)) { " \\noname" } else { surname(i) } } proc descch_indinomar(indi) { "{\\bf " call desc_chart_name(indi) "}" if (or(birth(indi),death(indi))){ " " if (e, birth(indi)) { year(e) } "-" if (e, death(indi)) { year(e)} } nl() } proc descch_prcouple(indi,fam,num) { if(eq(num,1)) { "{\\bf " call desc_chart_name(indi) "}" if (e, birth(indi)) { " " year(e)"-" } if (e, death(indi)) { if (not(birth(indi))){" -"} year(e) } } nl() /* I can't remember why I put this IF in here. I guess I'll take it out and see what breaks! */ /* if(eq(num,nfamilies(indi)))*/ /* {*/ if (e,marriage(fam)) { " m. " year(e) " " } else {"m.\\ \\ \\ \\ \\ \\ " } /* space over without date */ /* }*/ } proc descch_printfam(indi,fam,sp) { "\\spouse{ " call desc_chart_name(sp) "}" nl() } proc desc_chart_out(indi,depth,level) { if(or(eq(0,nfamilies(indi)),eq(depth,level))) { call descch_indinomar(indi) } if(lt(level,depth)){ families(indi,fam,sp,num) { call descch_prcouple(indi,fam,num) call descch_printfam(indi,fam,sp) set(level,add(level,1)) set(num2,0) if(le(level,depth)) { children(fam,child,num2) { "\\subtree " nl() call desc_chart_out(child,depth,level) "\\endsubtree " nl() } } set(num2,nchildren(fam)) set(level,sub(level,1)) set(temp1,ne(num,nfamilies(indi))) set(temp2,gt(num2,0)) if(and(temp1,temp2)) /* if(ne(num,nfamilies(indi)))*/ { if (eq(level,1)){ "\\endtree " nl() "\\tree " nl() } else { "\\endsubtree " nl() "\\subtree " nl() } } } } } proc excursion(indi) { list (anclist) indiset(ancset) "\n\\section{" surname(indi) " Ancestors" "}" "\n" "\\label{" key(indi) "-excur-ref}" "\n" /* get us to the patriarch of the line.*/ set(thisguy,indi) addtoset(ancset,thisguy,0) while (father(thisguy)){ set(thisguy,father(thisguy)) push(anclist,thisguy) addtoset(ancset,thisguy,0) } "The " surname(indi) " line has been traced back to " call texname(inode(thisguy), 0) "." while(indi,pop(anclist)){ print ("Excursion: ") print(name(indi)) print("\n") call longvitals(indi,1,2) families(indi, fam, spouse, nfam) { "\n\n" if (eq(0, nchildren(fam))) { call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } call havehadchildren(indi, spouse) } elsif (and(spouse, lookup(stab, key(spouse)))) { "Children of " call texname(inode(indi), 0) "\\ and " call texname(inode(spouse), 0) "\\ are shown under " call texname(inode(spouse), 0) "(" d(lookup(stab, key(spouse))) ").\n\n" } else { "Children of " call texname(inode(indi), 0) "\\ and " if (spouse) { call texname(inode(spouse), 0) } else { "\\noname" } ":\n\\begin{childrenlist}\n" children(fam, child, nchl) { "\n\\item " set(personIsAnc,0) forindiset(ancset,them,val,num){ if (eq (them,child)){ set(personIsAnc,1) } } if (personIsAnc){ "**" call shortvitals(child) } else{ call longvitals(child, 0,2) } addtoset(idex, child, 0) } "\\end{childrenlist}\n" } } } "\n\n\n" }