| Spinning Target |
 |
| These are the instructions to make a target that spins once hit. Along with a picture that shows what it looks like. |
| First, like always, you need: - Wire from a clothes hanger - Wood - Cardboard - Beads 1) First, get a piece of wood. This will be the base which will keep your targets standing. Something smaller then a 2X4 is good. Will get back to this later. 2) Take your cardboard and cut out pieces the size of cards. 2 or 3 would be good. 3) Now get your wire, and bend it to be straight as can be. Now you see those zig-zags on the side of your cardboard that look like this /\/\/\ (some might be different), slide the middle of them all through the wire. Now put a bead after every cardboard you put in, so that they dont touch eachother. Now bend each side of the wire so you can stick it in the wood. 4) Back to the wood, drill holes in the exact places where the end of the wire will stick in. Now stick each end of the wire in, and your good to go! You now have a target that will spin once hit! You can draw little faces or do whatever to your cardboard! Be creative! Hopefully this pic can help assist you. |
 |