 |
| Airtech Ball Blaster Mod |
| Well I got bored and decided to do something with my Airtech Ball Blaster. So why not try and mod ball gun? To do this mod, you need: - Airtech Ball Blaster or Reactor (there both the same thing) - Screw driver (+) - 4 Rubber Bands (optional) - Plyers 1) Alright first open this gun up from the handle side. When you unscrew all screws, theres a part at the top that is plastic and keep both halfs of the gun together, and it won't let you open it without breaking it. Just break it off, it's useless. And open it slowly. Nothing should shoot out. |
 |
| 2) Now pull out the reddish tube. You know, the part with the spring in it. Pull it out of the white tank. Look inside, there should be a little black air restrictor. Get those trusty plyers and ply them out. Just ply each of the small legs out and then yank the middle part out. It shouldn't be too hard. |
 |
| 3) Now with that done, put it back inside the white tank. What I did with the white tank was put 4 rubber bands evenly spaced out around the tank. It doesn't do much, but it does hold the tank in place from rolling around, which might do a little something. You don't have to do that. 4) Now you can put it all back together! This gun normally shoots 15 feet, but now it shoots... 20 feet! Wait, that's bad. Yeah it is bad. Sorry to say, but ball guns can't go very far, and this thing sucks. But hey, now you put some use to it! It's a great little blaster to shoot around indoors and have some fun, or maybe use it as a mortar. But it's not practical in a war. 5) I tried opening it from the front, but it's stuck to this orange piece that needs to be there. It kinda holds in the air tightener. So if anyone can find a way to get inside and stretch the spring, that should help a bit more. |