 |
| Sling-Bling |
| This is My HomeMade Nerf gun, the Sling-Bling! This is my first Nerf Homemade. I was going to spray paint mine silver or gold, so thats why its called the Sling-Bling! |
| This is sorta like a easy beginner gun. what you need is: - 2 PVC pipes, one wide, one thin ( you pick the size! Just make sure the inner and outer pvc are the same size and so that a dart can fit in there! It should be around 7-8 inches, or higher ) - Rubber bands - Duct Tape or Hot glue gun And make sure the inner pvc tip is blocked off at the area were it hits the dart. 1) Tape or glue the 2 rubber bands to the inner pvc in the back (the tape/glue will be your handle for pulling it back) 2) stick the inner pvc in the outer pvc (make sure it fits) and with the end of the two rubber bands stretch that over to the "barrel" (part were you stick the dart in) and leave like an inch or two from the tip to the the rubber bands (the ones you just taped/glued) |
| You can Attach this to the top of a Nerf gun for an extra arm! Just pull it back (But not too far or it will pop out) and let go! |
 |