| Sharp Shooter 2 Mod |
| The Sharp Shooter 2 has many mods. This is a very good gun! And I have a mod for it to make it even better! You will need: - Sharp Shooter 2 - Screw Driver (+) - Duct Tape - Two Secret Strike Pocket Blasters - Rubber Bands WARNING: When you open the gun, it will be very hard to put it back together! If you dont want to open the gun up, skip over to number 4. 1) Open the gun up. Keep the screws. 2) Cover up that hole on the bottom barrel with duct tape. Now put it back together, but dont add the ammo holder with the fin. 3) Duct tape only the ammo holder on. Make sure its on there strong. 4) Now stick a SSPB in where the ammo goes on the ammo holder. Make sure the pump pipe on the SSPB is being held by the ammo holder. If its not sturdy, duct tape it down. Put the other SSPB on the other ammo part. 5) Now strech rubber bands going from the middle front of the two barrels, to the cocking handle. You should now have a Modded SSII! Its cocking mechanism will push foreward faster so the darts can shoot out farther. And it has Two SSPBs on the sides so if you run out of ammo, you can use those! |
 |
 |
| Note: I dont have Rubber Bands on. |
 |