| Lock 'N Load Mod |
| To do this Mod, you will need the following: - Lock 'N Load - Small Screw Driver (+) - Keychain Ring - Super Glue - Rubber Bands 1) Take the Small Screw Driver and screw out the small screws on the green cocker. Save the screws If you want to put it back together. 2) After thats done, open it SLOWLY, just incase you might want to put it back together. Becuase once its open, the springs might get out of place. 3) Take all the springs out that are attaching the green cocker, with the Lock 'N Load. Now you will have only the orange cocker that is on the back end of the gun. 4) Take the Keychain Ring and Super Glue it to the Orange cocker. So now you can pull back the gun by using the Ring instead of the green cocker. 5) Stick the rubber bands from the back of the gun, to the front. This makes the gun feel lighter, which is good if you want to carry more guns! And now that the green cocker is off, it will make it easier for the orange cocker to push its self forward! |
 |
| I did the mod a bit diffeently, as you can see above, I added some useful do-hickys. |
 |