home | what's new? | bad things | tips | calendar | askCat | resources | contact | guestbook

How to Make

A Stunning Crystal Cut Bead Necklace

finished necklace

I apologize for the crappy picture. I will get one on a living body soon.

Materials:

1 pkg rocaille crystal beads (8 grams)
1 pkg 4 mm crystal cut beads
1 pkg 8 mm crystal cut beads
3 head pins
21 inches of fishline or invisible jewelry wire (longer or shorter to fit)
Clasp of choice
2 crimping beads
Round nosed pliers
Needle nose pliers
Aleene's Tacky Glue

loop step 1 First, prepare the crystal drops. Take a head pin jewelry wire and thread one 4 mm bead followed by one 8 mm bead. Use the pliers to cut the excess wire, leaving enough to curl into a loop. Using the round head pliers, bend the wire into a loop. Use the needle nose pliers to squeeze the loop into place if necessary. Repeat this process two more times.
loop step 2
crimp bead Next, thread a crimp bead on the fishline and loop the line through the loop in one side of the clasp. Thread the end of the wire back through the crimp bead. Apply pressure to the crimp bead until it is holding both pieces of the fishline securely. Add a drop of Aileen's Tacky Glue to the crimp bead to ensure that it won't slip.

Side note: One package of each type of beads is more than enough for the dangley earrings, the crystal cut bead necklace, the crystal cut bead bracelets, the fancy hair combs, and the bridal tiara. So when I say one package in the materials, you don't need nearly that many.

When the glue has dried, you can begin the beading. I will call the rocaille beads small, 4mm will be medium and 8mm will be large. Thread 20 small beads. Follow with this combo: one medium, five small, the drop you made earlier, five small, one medium, five small, another drop, five small, one medium, five small, the last drop, five small, and one medium. Finish it off with 20 more small beads.

Thread the line through the other crimp bead and then through the other half of the clasp. Go back through the crimp bead and squeeze the bead with the needle nose pliers. Add a drop of glue to the crimp bead and let it dry.

 


Click to subscribe to the Cat Smith DIYing Newsletter!!

 

home | what's new? | bad things | tips | calendar | askCat | resources | contact | guestbook

 


Cat Smith DIYing and its contents are ©2002
Contact the Web Mistress regarding any questions, comments or problems:
DIYgothicCatGrrl

 

Hosted by www.Geocities.ws

1