****************************************

        Hacking ARPANET -- Part I

                  by

              The SOURCE

                  of

       -=>*The Listening Post*<=-

              408-923-7575


***************************************

INTRODUCTION
------------

ARPANET (Advanced Research Projects Agency NETwork) was funded by the Department
of Defense (DOD) in 1969 as an experiment in sharing the resources of many
different types of computers.  Earlier DOD systems (AUTODIN,for example), relied
on linking computers that were the same make, using the same operating systems.
Work on ARPANET was performed under contract by many organizations, including
educational institutions, and today it is universities who are the primary
network users.

     Once logged onto ARPANET a user may conference with, or use the program
resources and available data files of any other computer that is on the system.
Hundreds of computers are available over ARPANET including computers at non-
university research centers like Rand Corporation, SRI and other military-
industrial think tanks.

     Until late 1983 and early 1984, military computers were also a major
ARPANET resource.  With the threat from young computer "hackers", however, the
military computers have moved to their own ARPANET-like network called MILNET.
The two networks are now part of what is known as the "DDN" or Defense Data
Network.  ARPANET nodes may be used to dial-up MILNET nodes as long as the
caller can enter the proper authorization code and password once connected to
the MILNET node.  MILNET users can, likewise, use ARPANET resources.

     ARPANET is also used as a resource for students as well as computer
scientists and engineering specialists.  Because of the variety of users, the
system tends to be very talkative about itself and very helpful.  Periodically,
however, certain ARPANET nodes decrease the amount of help that they provide
online.

     Despite the fact that dozens of different types of computers are interfaced
in ARPANET, it is a simple system to use because all nodes (called TIP's), use
fundamentally the same operating systems on either DEC (Digital Equipment
Corporation) models 20 or 10 mainframes.  The operating system is called the
"EXEC" and is called the TOPS-20 Monitor (on the DEC 20).

     Access numbers for local ARPANET nodes can be found from users of certain
bulletin boards, by calling the system manager, or by asking someone who attends
a major university.

GETTING ON
----------

     Once connected to the system, hit <CR> once for 300 baud or twice if you
are using 1200 baud.  The EXEC then recognizes you and displays a welcome
message as below:

WELCOME TO ARPANET
**FOR OFFICIAL USE ONLY**
Call the NIC at 1-800-235-3155 for TAC user problems.
Type @n for news.
SU TAC 110 #:13

     At this point there are only two commands that the Exec will recognize:
@N for news, and @O for onto the host sysem.  Start by checking out the news.
The node you have reached may be willing to be very helpful and informative.

NEWS FROM THE EXECUTIVE
-----------------------

     A sample executive session follows below:

@N  <user entry>
TCP Trying...Open
SRI-NIC, TOPS-20 Monitor 5.3(5731)-1
*  For TACNEWS, enter:  tacnews<RETURN>
*  To find the host administrator for host xy-z, enter:  whois xy-z<RETURN>
*  Report system problems to Action@SRI-NIC or call (415) 859-5921
There are 7+12 jobs with load average  1.13

@TACNEWS  <exec provides @ prompt, user replies "tacnews">

SRI-NIC TACnews 1.3(15)-2 on Sunday, 23-Sep-84 11:13pm-PDT
Send bugs or comments to TACNEWS@SRI-NIC.ARPA
  1. Announcements (updated 14-Sep-84)
* 2. Dial-Ups (MILNET TAC telephone numbers, updated 17-Sep-84)
* 3. Login (Help with TAC login, updated 24-Aug-84)
  4. Newsletters (DDN News, updated 24-Jan-84)
  5. Bulletins (DDN Management bulletins, updated 17-Sep-84)
Type a menu number ('HELP<CR>' for more info): HELP

The NetNews program lets you access sets of news files at the DDN Network
Information Center (NIC).  So far, you have entered the program and seen a menu
of available sets and documents.  Documents are marked in the menu with a '*'
in the first column.  To view a doument, or browse through a set, type its menu
number followed by carriage return, <CR>.  If you choose a set, you will then be
shown a su

