 |
Cleaned the dash board and managed to get the inside edges of the windshield clean on both sides! It took a fair bit of patience and the help of a soft plastic zip tie to convince the cotton cloth and polish down into the corners. The results were worth the trouble though! |
| Removed the stabilizer!
The penetrating oil did the trick again, and everything
came apart without any hammering! No corrosion on the
stabilizer piviot, other than the usual brown in the oil.
After wiping it away, you can see the clean bare metal of
the bearing. Sept. 15, 2002 |
 |
 Stabilizer shafts... |
 Back stabilizer piviot. |