>How TO create a 4x6 Wargames table >Note , This will be updated as I get more supplies for the table.
Well here is how I made a 4 X 6 Wargames table.
Equipment needed.Liquid Nails or another adhesive for bonding the insulation together , plaster could work 2 4 X 1 sheets of card board Elmers Wood Glue Flock/Sand
Spray Varnish
Alright , Take your 3 pieces of 4 X 2 insulation as Insulation doesn't come in 6 X 4 Sheets , And Use the liquid nails or it's equivilent to glue them together. Next , wipe off any excess with a paper towel or cloth , I would advise the paper Towels. now , lay it on an area where it won't be touched , the cardboard covering the seams of where it was bonded. Set for 24 hours.
Next day or Some time later... pour wood glue on the insulation , spread evenly ( I CANT STRESS THIS ENOUGH ) place sand on the wood glue. Allow to dry completely , this may take a long time , I suggest if your not using elmers to wait a whole day.
Next Day Now then , shake off the excess glue , and spray varnish ... wait 30 minutes. Now , with brush on a layer off thinned down wood glue , wait a few minutes ( like 5 or 10) for it to set , then sprinkle on Flock. Cover completely. Shakeoff extra now brush on more wood glue , allow to dry , and then paint the flock and there you have it , a nice , durable table. To get rid of the rest of the pink on the sides , I recommend getting some plasticard , cutting it to fit the board edges and spray them black then apply to the sides of the board.
