Progress is being made slowly but progress none the less. No surprises so far.

	The upper and lower frames are partially completed.
	The engine wiring must be done after the upper and lower frame halves are assembled due to the fact that the valve covers can not be installed until then. These are 2 hemi engines and being so the sparkplug wires go through the valve covers.
	First coat of paint on body was Model Master Insignia Yellow No.1708 This was a flat yellow I used as sort of a tinted primer. The paint that was applied here is Model Master Chrome Yellow No.1707 This is the first 2 coats of what should be about 6 or 7 with wet sanding between each one. All will be applied with an airbrush.