Mods include moving the bat and the elevator servo in the tail. And the bigger rudder. Well...I got board one day and well you can see for your self below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIG SOMTHIN EXTRA | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Sig somthin extra. Its powerd with a OS 46 FX with a 11.5x4 APC prop. Radio is a Futuba 9C with all 3004 servos and a 5 cell 1100 mah bat pack. Wieght is 5lbs and hovers at 1/2 throttle. The plane dosnt knife edge to good but I put a bigger rudder on it and moved the cg back to 4.5 inchs back from the leading edge. It will do most 3D manuvers. Mods include moving the bat and the elevator servo in the tail. And the bigger rudder. Well...I got board one day and well you can see for your self below. |
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Well I striped the covering and the old tail off of it. I am looking for a little better 3D machine so I added about 1.5 inchs to the turtle deck and am going to put the profile tail on it. Im thinking about putting some kind of cowl on it to clean up the nose. I will have more picures as i progress. | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| This is the new stab and elevator. See the diffrents between the new and old? Just enough to give me some more athority. | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Here's the mok up of the tail | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||