| Moshmelloz Stair-Ledge Combo |
 |
 |
 |
 |
 |
 |
 |
| Step 1 Buy a Tech Deck stair and ramp set from KB Toys for 4.99. Join them together with the connectors. Next, pull out both of the handrails on the stairs (may take some effort. *Note* Be sure you pull straight up or you might break the base of the rail |
| Step 2 (optional) Now that you have both handrails out we'll move to the next step. Get a drill and a 5/32" drill bit. Drill the extra two holes as seen in the diagram at the top stair and bottom stair next to the other hole. Make sure they're spaced apart exactly like the diagram or the double rail will be spaced apart or too close. |
| Step 3 (optional) Now that you got the holes drilled, insert both rails into the adjacent holes as seen in the diagram. You now have the double handrail. |
| Step 4 Now we need to make the ledge. Make it however tall/wide/sloped as you want it. I used a plastic fiberboard to make mine with this shape. Make your's out of anything you want. 3/4" plywood is a good material to use. |
| Step 5 Next you need to put your ledge up against the stairs and ramp, line it up at each end correctly, clamp or hold it together, and drill two holes through it (be sure not to let it move any while drilling). The holes can be drilled anywhere as long as they penetrate the ledge and the stairs/ramp in the same place. |
| Step 6 Get two screws and bolts that will fit through the holes you drilled and screw them in place to secure the ledge to the stairs and ramp. |
| Step 7 Before you look at how awesome your creation is, be sure and put a bead of silicone on the bottom surfaces to keep it from sliding around in the future. |
| Step 8 Be sure to finish off your Moshmelloz project with a Moshmelloz sticker on the profile of the setup. I don't have it in this picture, but there's a "No Skateboarding" Sticker I put up on the right side of the ledge. |
 |