| Jason's EZ Go Golf Cart Project |
| Week 2 3/4/2002 |
| Monday 3/5/02 |
| I started taking off the body . First I removed the top. Next I removed the seat back and bracket. Then the access panel on top of the rear body section. And finally removed the bag well liner. |
| I took out the battery and cleaned a lot of mud and dirt out from under it. I highly recommend that TXT owners, take out the battery and clean often. The battery plate was slightly rusted. Nothing a wire brush and some paint won't fix. |
| Next I took off the sill plates, then drilled out the rivets that hold on the rocker panels. Another place where mud was hiding. Next I disconnected the choke pull and plate from body. |
| I took the bagwell liner out and took off the scuff plates, and cleaned it up a little. |
| Drilling out all the rivets came next. This was a real pain. But the body came off without a problem. |
| I took the floor mat off too. Next I will be attempting to take the dash and front cowl off. Then I see a lot of cleaning in my future. |
 |
 |
 |
 |
 |
 |
 |